Hakkımızda
Haftanın Ürünü
Markalar
Kategoriler
Firmalar
Sektörel Haberler
Distribütörlük Belgeleri
İletişim
 
Ürünlerini Sattığımız
Firmalar
ADLER SpA Agromatic
BRITISH ENCODER COPAL-ELECTRONİCS
DINEL DURAG
FORTRESS INTERLOCKS FRABA Posital
GUARDMASTER HETRONIK
HOKUYO INDUcoder
Jokab Safety KBT
KSR-KUEBLER MERCOTAC
NEAM2 Nippon GT Corporatio
RADIO ENERGIE RAVIOLI
samwha EOCR SIEMENS
SONG CHUAN SONY
TAMAGAWA-SEIKI Tec-Automatismes
TEKEL TER Tecno Elettrıca
Thermo Ramsey TUCCO
VITRIN YM TECH
ZANDER AACHEN
  Ayrıca Diger Firmalar
  (Baş Harfine Göre)
  A     B     C     D     E     F     G  
  H     I     J     K     L     M     N  
  O     P     Q     R     S     T     U  
  V     W     X     Y     Z  



Emekyemez Mah.Yüksek Minare Sk. No:8 / 17  80020 Karaköy / İstanbul
Telefon : +90 212 235 95 35 / 36   Faks : +90 212 235 95 37 
E-posta : info@imajteknik.com

 

KUHNKE

Relay Contactor 105
4 poles
DC and AC coils available
High switching capability through bridge contacts
High contact reliablity through twin contacts
Mechanically guided contacts for security controls in accordance with DIN VDE 0113 part1
PC-Board version available

 
Miniature Relay 111 A2/H1
1 or 2 C/O contacts
DC and AC coils available
With LED and protection diode on request (please note polarity)

 
Quattro Relay 114
4 C/O contacts
DC and AC coils available
With LED and protection diode on request
Cadmium free contacts
Mecanical indicator
Isolation group C250 for Quattro relay with socket Z366.02

 
Time Relay Universal 130
2 C/O contacts
Time relay for relay universal series
Nominal time range: 4 different types (3sec, 30sec, 180sec, 600sec)
Four different version: pull in delay, switch off delay, blinker, switch on wiper

 
Series No.: 171
1 pole 12A/250VAC 3.5mm pinning
1 pole 16A/250VAC 5mm pinning
2 poles 8A/250VAC 5mm pinning
DC and AC coils available
UL and CSA approved
Flux tight
Cadmium free contacts

 
Measuring Relay F1570
Frequency monitoring relay with auxiliary voltage
Monitoring of under-frequency in AC current systems
Operating range -25 to +70°C

 
Industrial Switching Relay I
2, 4, 6 or 8 C/O contacts
DC and AC coils available
Twin contacts for high contact making reliability
Large contact gap, switching voltage therefore 400V
Supplied with blow-out magnet for high DC loads

 
Measuring Relay I1540
Single phase current monitoring relay
Monitoring of under-current for DC and AC voltages
Operating range -25 to +70°C

 
Measuring Relay I540 / I541
Single phase current monitoring relay
Standard housing 22.5mm wide
Selectable memory function
Analogue output for setting the switching point
Test voltage 3750VAC

 
Industrial Heavy Duty Relay IH
1 N/O contacts for 16A
DC and AC coils available
Long service life of contact at high switching capacity

 
Relay Universal MF
2 or 3 C/o contacts
DC and AC coils available
Large contact gap
Switching voltage therefore 400VAC

 
Relay Universal MF for Current Monitoring
2 C/o contacts
Large contact gap
Monitoring of DC and AC currents

 
Power Relay P
1 bridge contact for 50A
With blow-out-magnet for switching high DC loads
DC and AC coils available
Auxiliary contact as control contact possible
Tungsten contact material available
DIN-rail version available

 
Process Relay PZ610/620
Process relay analogue to digital converter
Standard housing 22.5mm wide
Alternatively with relay (PZ610) or transistor output (PZ620)
CE mark

 
Process Relay PZ630
Process relay analogue to analogue converter
Standard housing 22.5mm wide
Analogue inputs galvanically separated
CE mark

 
Process Relay PZ640
Process relay PT-100 with analogue output
Standard housing 22.5mm wide
LED indicator for sensor error
For sensor from -50 to 300°C
CE mark

 
Process Relay PZ650
Process relay analogue frequncy converter
Standard housing 22.5mm wide
Connect to PLCs with digital counter inputs
CE mark

 
Process Relay PZ660
Process relay analogue frequncy converter
Standard housing 22.5mm wide
CE mark

 
Measuring Relay U1510
Single phase voltage monitoring relay
DC and AC under-voltage measuring
Operating range -25 to +70°C

 
Measuring Relay U510 / U511
Single phase voltage monitoring relay
Standard housing 22.5mm wide
Selectable memory function
Analogue output for switching point adjustment
Test voltage 3750VAC

 
Measuring Relay UD1515 / UD1525 / UD1535
Three phase voltage monitoring relay
Monitoring of the three phase system
Operating range -25 to +70°C

 
Measuring Relay UD517 / UD532
Three phase voltage monitoring relay
Standard housing 22.5mm wide
Selectable memory function
Test voltage 3750VAC

 
Relay Universal UF
2 or 3 C/o contacts
DC and AC coils available
Twin contacts for high contact making reliability
With LED and protection diode on request
Cadmium free contacts
Mecanical indicator

Contact:TÜRKİYE/İMAJTEKNİK LTD ŞTİ

www.imajteknik.com





KUHNKE hakkında daha fazla bilgi için tıklayınız...

© copyright 2007