Çalışmalarımızdaki en büyük referansımız, geride bıraktığımız başarı dolu
Hızlı Erişim: +90 212 235 95 35 info@imajteknik.com
TREN

TAKIKAWA -Quarity Control

Quarity Control

Data Printers / Application Software

Quality Control Printer (LDM-100QC):
A unit to print out statistical calculating value necessary to quality control such as average, standard deviation, histogram, etc.

Counting Event Printer (AD-50):
This unit is to print out continuously distance message at the time when alarm signal is received.

Printer for LASER DIAMETER (RS-Printer):
RS-PRINTER takes through the RS-232C interface and prints the display value from Takikawa’s Laser Diameter

LASER DIAMETER MEASUREMENT SYSTEM ( LDM-PC EX )
It is application software to take the result measured with the LASER DIAMETER made of our company from the display part into PC by serial communications (RS-232C), and to file the graph print and the measurement result.

 

Type

Quality Control Printer

Model

LDM-100QC

Input

BCD data input
(RS-232C or Analog deviation voltage is also available by option.)

Setting items

Center value, Upper value, Sampling method, Sampling period,
No. of data, Histogram width, Date

(Battery backuped)

Printer

Thermal type. 27-digit. 58mm wide

Print out contents

Each set item, T-graph(Real time), Histogram, No. of data, Max. value, Min. value, Range, Average, Standard deviation, Variance, Deviation, Process capability index, Bias for specification

Display

20 digits * 2 lines LCD with Back light

External input

Start/Stop, Hold(Trigger)

Power supply

AC100 - 240V Free power supply 50/60Hz, less than 10VA

Outside dimension

350(W) * 99(H) * 331(D)[mm]

Weight

3.5kg

Accessory cable

BCD cable 1pcs.

Ambient condition

Temperature: 0 - 45 degree centigrade, Humidity:35 - 85%RH(No condensation)

Alarm Unit

This unit makes alarm by both buzzer and light.

Alarm unit -- Specifications

Type Alarm unit
Model AL-03
Summary This unit makes alarm by both buzzer and light by recieving alarm signal and memorizes number of alarms in panel counter
Input Non-voltage contact signal(On-time:More than 0.1sec)
Output Light and buzzer (Memorized to counter)
Reset input Reset switch on front panel turns off Light and buzzer
Outside dimension 110(W) * 315(H) * 85(D)[mm]
Power supply AC100V 50/60Hz 15VA

External Display Unit

DSP@Series -- Specifications

 
Type External Display Unit
Model DSP-4 DSP-48
Summary This unit indicates measuring values by BCD data of
Laser Micormeter at far distance place by BCD signal.
Power supply AC100V 50/60Hz AC100 - 240V 50/60Hz
Input BCD, Open collector input(Negative logic)
Max. cable length 100m
Display 4-digit Red 7-segment LED
Char. height:15mm		 4-digit Orange 7-segment LED
Char. height:76.2mm
Outside dimension 72(W) * 36(H) * 137.5(D)[mm] 310(W) * 140(H) * 140(D)[mm]

Others

HIGH SPEED PRINTER

  • This equipment is an insturument og gravure direct printing which marks company name, product name,size,etc on the cables of PE,PVC,LDPE,TEFLON or the pipes.
  • It is for high speed and low speed.
  • Servo motor drives the high speed printing roll.
  • it is built-in with adjustment function of the direction to delay.
  • Controlling the position and tore of servo motor enable to print in high speed and high quality
     

    HIGH SPEED PRINTER -- Specifications

    MODEL PRT-SL PRT-SH PRT-DH
    TYPE LOW SPEED PRINTING HIGH SPEED GRAVURE PRINTING
    APPELICABLE 1 - 80mm 3mm below
    MAX.LINE SPEED 350m/m 1000m/m
    LINE CENTER 900 - 1100mm
    PRINT HEAD 1EA 2EA 1SET
    ROLL DRIVE WIRE DRAW AC SERVO MOTOR CONTROL SYSTEM
    ROLL SIZE 100 x 10mm
    INK PUMP INK MIX ROLL MOTOR AIR PUMP GEAR PUMP
    INK FIXED Manual adjustment according to speed Auto adjustment according to speed
    PNEUMATIC 3kgf/cm2 above
    SIZE (W)x(H)x(D)mm 400x1500x600 700x1250x630 1000x1250x630
    POWER SUPPLY 220V AC 50/60Hz

PREHEATER

INDUCTION PREHEATER

Preheater of SungMin Instruments has wide
application range. The conductor should be preheated when the cable wire extruding is processing. For AL strip annealing. Preheat wire before the process of the wire coating for wire-net. Preheater attached communication-wire capstan. * It's very effective to marker high quality and productivity through the process of preheating the iron or nonferrous-metal

INVERTER PREHEATER

  • * Preheater of SungMin Instruments has wide application range.
    The conductor should be preheated when the cable wire extruding is processing.
    For AL strip annealing.
    Preheat wire before the process of the wire coating for wire-net.
    Preheater attached communication-wire capstan.
  • * It's very effective to marker high quality and productivity through the process of preheating the iron or nonferrous-metal
     

    INDUCTION PREHEATER-- Specifications

     
    Model Wire Size TEMP. Set Range kVA Pulley
    IP-200P15 0.5 - 3mm 299 15kVA 50/60Hz 200mm x 2
    IP-220P20 1 - 5mm 299 20kVA 50/60Hz 220mm x 2
    IP-300P20 2 - 6mm 299 20kVA 50/60Hz 300mm x 2
    IP-300P30 2 - 8mm 299 30kVA 50/60Hz 300mm x 2
    IP-400P50 3 - 10mm 299 50kVA 50/60Hz 400mm x 2
    IP-600P50 5 - 15mm 299 50kVA 50/60Hz 600mm x 2
    IP-800P50 5 - 20mm 299 50kVA 50/60Hz 800mm x 2
    IP-1000P100 7 - 25mm 299 100kVA 50/60Hz 1000mm x 2
    IP-1200P100 10 - 30mm 299 100kVA 50/60Hz 1000mm x 2
     

    INVERTER PREHEATER-- Specifications

     
    Model HP-120P15 HP-220P7 HP-220P15 HP-300P15
    Pulley 120mm x 3.150mm x 1 220mm x 2 220mm x 2 200mm x 2
    Wire Size Steel , Cu , AL , Solid ,Stranded
      0.2 - 1.5mm 0.5 - 3mm 0.8 - 4.5mm
    Wire Temp.
    Setting Range    		 0 - 299
    Wire Speed for 100 2000m/min 600m/min 2000m/min 2000m/min
    Capacty 220V. 15kVA 220V. 7kVA 220V. 15kVA 220V. 15kVA
    Work Frequency 1000Hz
    Remote control 0 - 10V DC Input
    Work Volt 0 - 70V 0 - 40V 0 - 70V 0 - 40/70V
    Power Supply 220/380VAC 3Phase 50/60Hz

TALC MASTER

* TALC MASTER is a machine which can make can make an even application of the talc powder to the core wire for an easy separation from its covering material, when necessary.
* It has some special characteristics in that it can minimize the consumption of the talc powder;
It can control the quantity of the powder in proportion to the speed of the wire production.
Powder jet spray by a high pressure blower is possible.
* Quality application of the powder is guaranteed by using the electrostatic collector.
Three circulation filters are in use.

 

Model TM-E40 TM-E70
Type Electrostatic Powder Application
Wire Size Max.40 Max.70
Fault Alarm Blower, Screw, Electorostatic, Powder low
TALC Powder DOSAGE Controller
Center Height 950 - 1150mm
Compressure Air Supply 4kgf/cm2
Scattering check equip Ring blower
Heater 1.5kW Plate heater
Size
(W) x (H) x (D)mm		 750 x 1850 x 820 800 x 1850 x 1200
Static electricity voltage 0 - 50/90kVDC
Power Supply 220VAC 50/60Hz 1Phase 3kW

Butt Welding Machines

* By touch with each other process in the same
section, use to weld for a light alloy except copper and iron and to continuously work for invar or pressing up.
* A little change by heating and can quickly weld.
* Weld a suitable current electronic setting with using for SCR(Silicon Controlled Rectifier) running electronic control system according to material and thickness of welding materials.

 

Model Copper
sq.mm		 Aluminium
sq.mm		 Steel
sq.mm		 Transformaer
Rating		 Weight
GROSS		 Size
(W) x (H) x (D)mm		 type
SM-5BW 0.5 - 5 --- 0.5 - 7 3kVA 22kg 350 x 880 x 250 Handle type
SM-25BW 3 - 25 8 - 40 10 - 45 14kVA 24kg 704 x 1310 x 568 Handle type
SM-50BW 15 - 50 20 - 70 20 - 76 20kVA 250kg 704 x 1310 x 568 Handle type
SM-150BW 20 - 150 30 - 180 36 - 200 50kVA 780kg 1350 x 1420 x 1400 Pneumatic Auto type
SM-300BW 30 - 300 40 - 400 50 -430 Inverter 70kVA 840kg 1350 x 1420 x 1400 Handle & Auto type
SM-500BW 60 - 500 50 - 600 60 - 690 Inverter 150kVA 1050kg 1350 x 1420 x 1400 Handle & Auto type

*Input/Output Specifications

MODEL Input Power Output power
SM-5BW 220V AC 50/60Hz 1Phase 0 - 9V 50/60Hz
SM-25BW 220V AC 50/60Hz 1Phase 0 - 9V 50/60Hz
SM-50BW 220V AC 50/60Hz 1Phase 0 - 9V 50/60Hz
SM-150BW 220V AC 50/60Hz 1Phase 0 - 9V 50/60Hz
SM-300BW 220/380/440V AC 50/60Hz 3Phase 0 - 30V 50/60Hz
SM-500BW 220/380/440V AC 50/60Hz 3Phase 0 - 30V 50/60Hz

CORONA MASTER

  • This equipment is composed of the device generating high frequency and electrode unit.
  • In electrode, high friquency high voltage generates corona dischage in contact with jacketd copper wire. So the surface of jacket (PE, PVC, TEFRON, HDPE, LDPE) is activated and the adhesion is strengthened in the second progress, stamping.
  • Compact Size.
  • Easy to adjust the electrode.
  • High efficiency and with performance by using IGBT.
  • The interlocking device maintains the safety in opetation

CORONA MASTER -- Specifications

 

Model CM-200 CM-400 CM-GAS
Output Friquency 20 - 25kHz 20 - 25kHz GAS Flame
Capacity 1kVA 3kVA 1000
Output Voltage 5 - 12kV 3 - 10kV  
Electrode 220mm 800mm 260mm BURNER
Size(W)x(H)x(D) 500 x 1425 x 620 600 x 1200 x 650
Power Supply 220V AC 50/60Hz 1Phase

 

Type

Counting Evint Printer

Model

AD-50

Counting value
display

6-digit, 2-color(Green/Red), 7-segment LED.
Zero suppress is available.

Input pulse for
length measuring

Single/Double(A,B) phase pulse input is available,
Up/Down counting is available

Pulse Edge

Rising or Falling

Pulse rate

Free setting between 0.00001m/pulse - 999999m/pulse

Max. Pulse
frequency

2kPPS or 100PPS

Count sensor
power supply

+12V 250mA

No of Events

10 (8 Events + RESET & PRINT)

Event input

From Rear panel terminal

RESET input

From Rear panel terminal & front panel push switch

PRINT input

From Rear panel terminal, front panel push switch & RS-232C

Message
Change method

By RS-232C interface

PRESET1 setting

6 digit

PRESET2 setting

6 digit

Initial setting

6 digit

Lot No. setting

4 digit. Automatic increment by RESET is available.

Event distance
compensation

Each event distance can be set.

PRESET outputs

Count value display into Red color 7-segment from Green,
Front panel LED, RS-232C,
Relay contact(1a-contact, AC250V Resistance load 2A)

Printer

Thermal type, 20 digit, 58mm wide

Out-of-paper
signal

Front panel LED, RS-232C,
Relay contact(1a-contact, AC250V Resistance load 2A)

Timing function

Year/Month/Date and Hour/Minute

Battery back-up

Back-up the counter value, timing, etc.

Communication

RS-232C interface (Baud rate:300 - 19200bps)

Power supply

AC100 - 240V Free power supply 50/60Hz, less than 8VA

Outside
dimention

144(W) * 144(H) * 191(D)[mm]

Weight

2.8kg

Ambient condition

Temperature:0 - 45 degree centigrage, Humidity:35 - 85%RH(No condensation)

 

Type

Printer for LASER DIAMETER

model

RS-PRINTER

Printer

Thermal type, 20 digit, 58mm wide

Corresponding Model

Connected by TAKIKAWA's LASER DIAMETER
LDM-110A110EXA210A210CA1000A1000EX

Communication rate

Difference depending on the model. An initial value is 9600bps.

Power supply

AC100 - 240V Free power supply 50/60Hz, less than 8VA

Outside
dimention

180(W)×90(H)×210(D)[mm]

Ambient condition

Temperature:0 - 45 degree centigrage, Humidity:35 - 85%RH(No condensation)

 

Type

LASER DIAMETER MEASUREMENT SYSTEM

model

LDM-PC EX

PC/OS to be used.

Meet the forrowing requirement.

IBM PC compatible (DOS/V machine): CD-ROM should be able to be used.
Indispensable, and recommends CPU clock 300MHz or more
USB port or a parallel port is installed in the main body, and operate.

Microsoft@Windows98AMeA2000(sp4 or more)AXp

Corresponding Model

Connected by TAKIKAWA's LASER DIAMETER
LDM-110A110EXA210A210CA1000A1000EXA100A100XY(100EX)

Communication rate

Difference depending on the model. An initial value is 9600bps.

DataBitLength

‚Wbits

StopBitLength

‚Pbit

ParityBit

None

Function

Measurement Value Display,Peak value displayAMeasurement value state display
Data writeing , Graph Drawing and printing function

Elastoring/Spray Marker

  • These instruments mark to Cable/Wire/Pipe by Elastic rubber or Ink from spray at the time when alarm signal is received.
  • At present, Elastoring marker is in patent application at home and abroad.
     

    Elastoring/Spray Marker -- Specifications
     

    type Splay marker Elastoring Marker
    model MAC-01 EMAC
    -005    		 EMAC
    -009    		 EMAC
    -019    		 EMAC
    -041    		 EMAC
    -057    		 EMAC
    -160    		 EMAC
    -245
    Marking material Water paint
    (by spray)    		 Elastic rubber string
    Removement marking
    material from object    		 Difficult Easy
    Material supply ASAHI Water paint spray
    300ml recommendable    		 Supply from Takikawa
    Engineering as bobbin
    Thruough hole dia. Non 5mm 9mm 19mm 41mm 57mm 160mm 245mm
    Object dia. Without restriction 0.5 - 3mm 1 - 6mm 3 - 10mm 10 - 35mm 20 - 40mm 50 - 120mm 100 - 200mm
    Line speed Without restriction
    Marking delay 1 - 12•b
    (chanegable)    		 Max. 0.2sec(fixed)
    Marking time 1 - 5sec
    (chanegable)    		 (For a moment)
    Repeat period Total of Marking
    delay and time    		 Less than 3.5 sec Less than
    6 sec
    Power supply AC100V 50/60Hz AC100 - 240V 50/60Hz
    Power consumption 30VA 50VA
    Air supply Unnecessary 4kg/cm2
    Outside dimension 62(W) * 270(H) * 90(D)[mm] 360(W) * 190(H) * 590(D)[mm]
    (Except rubber supply),
    Weight:Approx.12kg    		 360(W) * 380(H) * 190(D)[mm]
    (Except rubber supply),
    Weight:Approx. 20kg    		 350(W) * 248(H) * 440(D)[mm]
    (Except rubber supply),
    Weight:Approx. 45kg    		 550(W) * 248(H) * 717(D)[mm]
    (Except rubber supply),
    Weight:Approx. 45kg

 

TAKIKAWA -Quarity Control Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

TAKIKAWA -Quarity Control hakkında daha fazla bilgi için tıklayınız.

Ürünlerini Sattığımız Markalar