Hakkımızda
Haftanın Ürünü
Markalar
Kategoriler
Firmalar
Sektörel Haberler
Distribütörlük Belgeleri
İletişim
 
Ürünlerini Sattığımız
Firmalar
ADLER SpA Agromatic
BRITISH ENCODER COPAL-ELECTRONİCS
DINEL DURAG
FORTRESS INTERLOCKS FRABA Posital
GUARDMASTER HETRONIK
HOKUYO INDUcoder
Jokab Safety KBT
KSR-KUEBLER MERCOTAC
NEAM2 Nippon GT Corporatio
RADIO ENERGIE RAVIOLI
samwha EOCR SIEMENS
SONG CHUAN SONY
TAMAGAWA-SEIKI Tec-Automatismes
TEKEL TER Tecno Elettrıca
Thermo Ramsey TUCCO
VITRIN YM TECH
ZANDER AACHEN
  Ayrıca Diger Firmalar
  (Baş Harfine Göre)
  A     B     C     D     E     F     G  
  H     I     J     K     L     M     N  
  O     P     Q     R     S     T     U  
  V     W     X     Y     Z  



Emekyemez Mah.Yüksek Minare Sk. No:8 / 17  80020 Karaköy / İstanbul
Telefon : +90 212 235 95 35 / 36   Faks : +90 212 235 95 37 
E-posta : info@imajteknik.com

 

Ravioli Spa

Ravioli Limit Switches

Model: FRS

Limit SwitchesDriver rotary limit switch FRS is a device with IP65 protection degree which allows you to control the movement of industrial and building machines. The shaft is connected to the motor, so that, after a certain number of turns, the cams make the switches work, and then they can carry out their pre-set manoeuvre. The easy and thorough regulation of the cams allows you to set the rapid trip microswitches working point linearly and micrometrically. The choice of different cam profiles allows you to modify the limit switches function diagram.

Model: FRM

frm1

Main features

The rotary limit switch is a device which allows you to control the movement of industrial and building machines.
The shaft is connected to the motor, so that, after a precise number of turns, the cams cause the intervention of the internal contacts.
The innovative and thorough regulation of the cams allows you to set the microswitches working point linearly and micrometrically.
FRM limit switch is equipped with 3 internal rotation axes, whose ratios for each exit can be different.
A forth rotation axis is available for the application of a speed reader. Ratios range from 1:1 up to 1:900, and the application of encoders, potentiometers or some other sensors in addition to the group of microswitches, realizes in the same device an analogic or digital output, which can be properly read.
Contacts are positive-opening (EN 60947-5-1), which improves the worker’s safe.
The series ranges several accessories, such as cog wheels, male shafts, flexible shafts, flanges, internal connections plates.
Ravioli is focusing its activity on products in the respect of people, following the standards which are defined in its Code of Ethic Behaviour. Such products have been studied in order to improve the workers’ safety, and they do not contain any substances which is harmful for the environment.

Technical features

Insulation voltage

250V~

Maximum operating voltage

250V~

Black lower casing

reinforced nylon

Yellow cover

termoplastic, high mechanical and thermical resistance

Operating temperature

- 20 °C + 60 °C
- 40 °C + 60 °C (on demand)

Drive

worm screws

Cable entries

standard: 2 glands M20×1,5
Options: more glands

Protection degree

IP 66 EN 60529

Protection against contact voltages

double insulation EN 60439-1

Max. rotation speed

500 rpm

Homologation

CE
UL - (c)UL execution on demand

Weight

approximately 800 g

Product

made in Italy

For years Ravioli has been focusing its production on renewable energy.
Driver FRM limit switches, which are also used in the wind turbines and solar tracks, are included in our Green e-motion Program. They represent a significant step in our project and our participation to the sustainability.
Driver FRM limit switches are in accordance to the following Norms:
2006/42/CE Machine Directive
2006/95/CE Low Voltage Directive
2002/95/CE RoHS Directive
1907/2006 REACH
EN 60947-1 Low-voltagwe switchgears and controls gears
EN 60947-5-1 Control circuit devices
EN 60204-1 Safety of machinery
EN 60529 Protection degrees
UL 508 Industrial control equipment
Driver FRM limit switches are guaranteed by our EC Certificate of Conformity, available upon request, where it is declared that such product has been manufactured by Ravioli in accordance to defined and acknowledged Safety Regulations, and in compliance with the Quality standards stated in our ISO 901-2008 Quality System Certificate.

Model : FCN

FCNThe rotary limit switch is a device which allows you to control the movement of industrial and building machines. The shaft is connected to the motor, so that, after a certain number of turns, the cams make the switches work, and then they can carry out their pre-set manoeuvre. The range of FCN rotary limit switches has been planned with a particular internal symmetry that allows you to have a series of 5 microswitches (on-off exits) as well as some other linear exits, and a potentiometer in the same box. The innovative and thorough regulation of the cams allows you to set the microswitches working point linearly and micrometrically. Reduction ratios range turns out to be remarkably large, since microswitches can be fitted with guaranteed opening (EN 60947-5-1) as well as deviation or progressive double opening contacts. The choice of different cam profiles allows you to modify the limit switches function diagram

Model : FCR

fcr The worm drive limit switches FCR are particulary suitable for controlling the stops of the lifting electric circuits on building cranes and bridge cranes.
The range includes, among the others, the limit switches equipped with up to 4 microswitches and respective adjustable cams, profile type 1 (standard - white coloured).
On request two other types of cams are available: the profile type 2 (grey coloured) or type 3 (red coloured). They are essential in any particular case to modify the operation chart.
The worm drive limit switches are furthermore supplied in two different versions: either with slow guaranteed opening switches (CEI 17.12 chapter 492) or with changeover quick break switches.
The outer casing is made of termoplastic material with high mechanical and temperature variation resistance

Ravioli Joystick Controllers

Joystick controller units with ergonomic case and open lever controllers.
Position sensors application.
Double insulating box, IP65

COMPACT controller

Joystick ControllersThe range of joysticks and COMPACT controller units are suitable for controlling hoisting and lifting equipments, and particularly cranes, by means of contactors or inverters. They can be supplied in an open version (MW and MC types) and mounted on fixed areas such as pulpits and seats.

They are also available in a portable box, COMPACT series, in which case they come with: 2 MC2 joysticks, 1 emergency stop button, a series of push-buttons and a shoulder-belt.
This equipment is the result of RAVIOLI’s long experience in the field, combined with in-depth ergonomic studies for innovative designs and materials, using state-of-the-art technology. Particular attention has been paid to easy handling of the device and to the mechanical aspects, in order to guarantee the suitability of the product for heavy duty work in industry. All the materials in direct contact with the environment are resistant to atmospheric agents, oils, temperature changes and crashes.
The rubber gaskets ensure excellent protection against dust and liquids. The COMPACT series of controller units has been designed to guarantee the ergonomic protection of the levers against accidental contact. The optimised space inside the units ensures that all connections can be made easily and quickly, and also simplifies the maintenance. The emergency stop button is built to comply with EN 418 standards
.

Safety industrial radio remote controls

Push button or joystick versions, also data feedback.
Special executions on request.
Manufactured since 1989, those are seventh generation radio remote controls.
According to EC Directives:
R & TTE Directive 99/05 EC - 2006/95/EC Low Voltage - 2004/108/EC EMC - 2006/42/EC Machinery.
Safety Rules:
EN 60204 – 32 - EN 55022 - EN 60529

Ravioli Dual

DualThe DUAL radio remote control, in the basic version with on-off outlets, is part of a range of radio remote controls designed for the movement needs of operating machines which require a high number of commands and proportional functions. During the design phase, particular importance was given to the conception of modularity, in order to make the device extremely versatile, expandable and suitable to be personalized.
By a standard transmitter and by inserting a special card in the receiver, it is possible to control all building cranes having proportional rotation. Many functions, which can be set using dip-switches, allow to lay different types of outlets for moving the crane up to 5 lifting speeds

 

Jump - J Line

 

JumpPush-button radio remote control Type JUMP


JUMP radio remote control can be used in several different application fields (f.i. building cranes, hoists, operating machines, etc.). JUMP is a highly safe radio remote control, it presents emergency button and, by reception, two stop and circuit relays with double microprocessor.


The ergonomic and sturdy (IP65) transmitter is provided with removable battery packs, which can be easily inserted and removed. Moreover, it is equipped by a comfortable, stuffed, doublefastening belt. Yu can change frequency and automatic stop time through the transmitter control buttons, and turn the self-switching-off option on or off. The receiver is available in two versions: outdoor with 12 or 20 relays, in a IP65 plastic container, easy to be installed and with a possible external antenna; or even indoor for control boards, with 20 relays, not bulky and which can be installed on DIN rails and provided with an external antenna. JUMP is available with customized sticky labels and with advanced functions on request.

n-JOY - J Line

n-JOY Joystick radio remote controlType n-Joy

Main features
n-Joy radio remote control can be used in several different applica-tion fields (f.i. building cranes, hoists, operating machines, etc.). n-Joy is a highly safe radio remote control, it presents emergencybutton and, by reception, two stop and circuit relays with doublemicroprocessor.The ergonomic and sturdy (IP65) transmitter is provided withremovable battery packs, which can be easily inserted and remo-ved. Moreover, it is equipped by a comfortable, stuffed, double-fastening belt.You can change frequency and automatic stop time through thetransmitter control buttons, and turn the self-switching-off optionon or off.Moreover, some additional control elements like push buttons andselector switches can be installed on request.The receiver is available in two versions: outdoor with 20 relays, ina IP65 plastic container, easy to be installed and with an externalantenna; or even indoor for control boards, with 20 relays, notbulky and which can be installed on DIN rails and provided with anexternal antenna.n-Joy is available with customized sticky labels and with advancedfunctions on request
.

Ravioli Twin Connectors For Battery Vehicles

Euro-Connectors 80,160,320A.
Rules DIN 43589, FEM EEC 86/663 Add.C, EN 1175-1.
Air-tech Series with Air Supply System
.

Applications

Aerial platforms
Batteries
Battery chargers
Electrical vehicles
Forklifts
Scissor lifts
Scrubbers for industry
Sweepers for industry

Europa

Twin Connectors For Battery Vehicles  Why EURO - Connectors ?
The European Union has led to the unifying and standardising of norms for all lift truck manufacturers.
Their products must therefore satisfy the norms included in the EEC European Machine Directive 89/392.
In the case of connectors the corrisponding requirements are defined in the EEC European Directive 73/23 - Low Voltage.
RAVIOLI’s EURO-Connectors have CE markings and are in conformity with the following Norms:
- The Norm DIN 43589 parts 1 and 2, which define unified distances between centres and unified dimensions.
- Recommendations FEM 4007a and 4007b
- EEC European Community Directive 86/663 Add.C
- Standardised European Norm EN1175-1
- EEC European Directive 73/23 - Low Voltage

Using EUROPE Series Connectors, RAVIOLI customers know that they are in conformity with the CEE Norms.

These connectors are suitable for linking electrical motors, batteries and battery chargers for lift trucks and electric vehicles up to each other.
Each model is made up of a plug and a socket different from each other.
The range includes three models:

  • 80A: for 16 or 25 mm2 insulated cable
  • 160A: for 25, 35, or 50 mm2 insulated cable
  • 320A: for 50, or 70 mm2 insulated cable

All types are prepared for the use of reducing bushings depending on the diameter of cable used. The main contacts are in silver-plated electrolytic copper.
As laid down by the Norms:

  • The connectors are supplied with a coding pin for operating
    voltage which ensures that only same voltage plugs and sockets
    can be connected.
    The codified values are 24-36-48-72-80-96V cc.
  • Standard equipment includes a cable clamp at the end of the
    joined plug and socket, which guarantees protection degree IP23.
  • All electrical parts are protected against accidental contact.
    In addition, two auxiliary contacts featuring maximum 20A continuous
    duty with advance opening compared to the main contacts
  • can be mounted.

Europa Air-tech

Airtech Why EURO - Connectors with Air Supply System
RAVIOLI’s EURO-Connectors have CE markings and are in conformity with the following Norms:
- The Norm DIN 43589 parts 1 and 2, which defines unified distances between centres and unified dimensions.
- Recommendations FEM 4007a and 4007b
- EEC European Community Directive 86/663 Add.C
- Standardised European Norm EN1175-1
- EEC European Directive 73/23 - Low Voltage
Using EUROPE Series Connectors, RAVIOLI customers know that they are in conformity with the CEE Norms.

Furthermore, in some types of traction battery a mixing of electrolite through air is required in order to improve the life of the battery itself.
Therefore, connectors are provided with a system including two small pipes, one for the socket and one for the plug, for transportation of air between battery charger and battery.
These connectors are suitable for linking electrical motors, batteries and battery chargers for lift trucks and electric vehicles up to each other. Each model is made up of a plug and a socket different from each other.
The range includes three models: 80A:

  • - for 16 or 25 mm2 insulated cable 160A:
  • for 25, 35, or 50 mm2 insulated cable 320A:
  • for 50, or 70 mm2 insulated cable

All types are prepared for the use of reducing bushings depending on the diameter of cable used. The main contacts are in silver-plated electrolytic copper. As laid down by the Norms:

  • the connectors are supplied with a coding pin for operating voltage which ensures that only same voltage plugs and sockets can be connected. The codified values are 24-36-48-72-80-96V cc.
  • standard equipment includes a cable clamp at the end of the joined plug and socket, which guarantees protection degree IP23.
  • all electrical parts are protected against accidental contact. In addition, two auxiliary contacts featuring maximum 20A continuous duty with advance opening compared to the main contacts can be mounted

BC 250

EuropaThese plugs and sockets complete the range of twin connectors used for link-ups between battery-operated vehicles and battery
chargers.
The main contacts are in copper alloy and are prepared for soldering of cables.
An auxiliary contact with advanced opening compared to the main contacts can be fitted on the connectors.
They are always supplied dismounted and complete with all accessories required for mounting.

America

AmericaConnectors type America in accordance to the Standard EN1175-1

 Ravioli Push Button Pendant Stations

Single or double - row pendant stations with international symbols.
Double breaking and self-cleaning sliding contact elements.
Double insulating box, IP 65

 Ravioli Push Button Pendant Stations LADY series

Push Button Pendant Stations The  single-row push-button stations for auxiliary circuits are the result of a blend of Ravioli’s long experience in the field, detailed studies in ergonomics, and the use of innovative, modern design and materials, in compliance with the best technology available today.

In designing the product particular attention was paid both to easy handling features and to the technical aspects, in order to ensure usage also in heavy-duty circumstances.

All the materials, which come into direct contact with the environment, are resistant to atmospheric agents, oils, temperature changes and are shockproof. The rubber gaskets ensure optimal protection against dust and liquids. The optimised internal space allows to make all connections easily and quickly. Bridge connections have been projected in order to reduce cabling time and are available upon request. LADY push-button station is offered in 6 different sizes, ranging from 2 to 12 buttons devices and various controls and switches can be mounted on each type. LAP versions for bridge cranes and hoists and LAE for building cranes are available.

Ravioli Push Button Pendant Stations Stilo series

stiloThe STILO range of push-button stations for auxiliary circuits has been designed and produced in compliance with the safety criteria specified in the Europan Rules Machinery Directive EEC 89/392. The products are the result of years of experience and are specifically designed for heavy-duty as well as normal requirements. Types PKE are most suitable for building cranes while types PKP are for bridge cranes. They are available in versions containing from 4 to 14 buttons, size and inside space tested to allow fast cabling, thus reducing time and costs.

Standard types from 4 to 50 rings.
Useful for high current Ith from 20 to 200A - 660V or digital signals transmissions.
Open, protected and watertight types.
EXD type (ATEX Norms).
Position sensors application.
Special executions on request

Ravioli Slip Rings

The emergency stop push-button has been designed in according to EN 418 regulations. The NC contacts feature guaranteed opening (EN 60947-5-1) and can be supplied also in the 2NC increased safety version. All buttons are marked with international symbols. The switches have self-cleaning sliding contacts in silver alloy.

 

Ravioli Slip Rings
PME Type

 

pme

PME Evolution is the latest family of sliprings, characterized by a high degree of protection IP65 and suitable for harsh environmental conditions.
With versions combined microsignal rings or power rings of 20 A, 50 A to 80 A, these outlets can be combined with rotary air passages or fluidic sliprings. And all enclosed in an aluminum and insulation, modular and innovative design

Ravioli Slip Rings
PMP Type

Slip RingsThe slipring PMP Type is a product studied by Ravioli’s Company to solve customer requests and to obtain high performance in small dimensions. This slipring, thanks to a 5 mm. lenght among rings, allows to use a very high number of strips in a small dimension. Brush-holders have copper graphite brushes.

Ravioli Slip Rings
PMS Type

Slip RingsThe slipring PMS Type, in the large RAVIOLI’s slipring production, is supplied in a water-proof housing and with a 5 mm. lenght among rings; very useful for outside applications and where small dimensions are requested.
Brush-holders have copper graphite brushes.

Ravioli Slip Rings
PRP Type

Slip RingsThe slipring PRP Type is protected; housing in insulating material with high mechanical resistance and also not changeable to temperature variations. The internal pipe, diam. 48 mm., free of cables, allows passage of piping for fluids, driving shafts and metallic ropes. Brush-holders can have blade or copper graphite brushes.

Ravioli Slip Rings
PRS Type

Slip RingsThe slipring PRS Type is mostly useful for outside applications, due to a steel housing with protection degree IP 55. Brush-holders have blade brushes. Copper graphite brushes on request.

Ravioli Slip Rings
ATEX

ATEXEXD sliprings are ATEX approved for Zone 21 and 22, and they are IP65; compact and modular, they are particularly required in dusted areas subject to a high explosion risk.

Ravioli Slip Rings
PRG Type

PRGThe PRG Type, without housing, is available with a large diameter possibility: 85 mm. up to 2000 mm., and for this it is possible to have a wide internal passage and different Amperes. Brush-holders can have blade or copper graphite brushes

Ravioli Slip Rings
PZG Type

PZG The PZG Type, without housing, has the advantage to have a wide internal passage and to be axially very compact thanks to insulating rings which devides the conductor rings. Brush-holders can have blade or copper graphite brushes

Ravioli Slip Rings
PSG Type

PSGThe sliprings: PSG Type without housing, PSP protected and PSP waterproof, have been requested for years for their execution and for the slideway between rings and brushes with a peculiar V contact. Brush-holders have copper graphite brushes.

Ravioli Slip Rings
PSG Type

PSPThe sliprings: PSG Type without housing and PSP protected, have been requested for years for their execution and for the slideway between rings and brushes with a peculiar V contact. Brush-holders have copper graphite brushes

Ravioli  D.c. contactors for battery vehicles

TECNO Type in ermetically protected case.
LOGO Type for operating voltage up to 96V.
TEAM Type IP 65 protected motor reversers

Applications

Aerial platforms
Agricultural machines
Autocranes
Bow thrusters
Control boards
D.C. Motors
Electrical vehicles
Forklifts
Machines for forestry
Scissor lifts
Scrubbers for industry
Sweepers for industry
Telecommunication
Trucks covering
Winches
Winches / Windlasses 

Ravioli D.c. contactors TECNO series
Tecno 6 - T106

Tecno T106The TECNO series contactors’ range, compact but powerful, has been designed to be suitable for the traction and material handling fields using direct current. Such contactors can be applied to lift trucks, industrial cleaning machines, various services on board of ships and boats, as well as to road and rail transport vehicles

Ravioli D.c. contactors TECNO series
Tecno 6 - T206

T206The TECNO series contactors’ range, compact but powerful, has been designed to be suitable for the traction and material handling fields using direct current. Such contactors can be applied to lift trucks, industrial cleaning machines, various services on board of ships and boats, as well as to road and rail transport vehicles

Ravioli D.c. contactors TECNO series
Tecno 4 - T154

T154     All the contactors in the TECNO series are suitable for the traction and industrial material handling sectors using direct current, and are often used on lift trucks, industrial cleaning machines , duty on board ships and boats as well as road and rail transport vehicles.
The TECNO 4 series of contactors described here has been designed for heavy duty and strict conditions such for example in the presence of prolonged or high rush currents.
The TECNO 4 series coils feature screw connections

Ravioli D.c. contactors TECNO series
Tecno 4 - T204

T204     All the contactors in the TECNO series are suitable for the traction and industrial material handling sectors using direct current, and are often used on lift trucks, industrial cleaning machines , duty on board ships and boats as well as road and rail transport vehicles.
The TECNO 4 series of contactors described here has been designed for heavy duty and strict conditions such for example in the presence of prolonged or high rush currents.
The TECNO 4 series coils feature screw connections

Ravioli D.c. contactors Logo - TL10 series

Logo TL10The range of LOGO series contactors type TL-10, which are very small and very powerful, has been designed to be suitable for the traction and material handling fields using direct current. Such contactors can be applied to lift trucks, industrial cleaning machines, various services on board of ships and boats, as well as to road and rail transport vehicles

Ravioli D.c. contactors Logo - TL20 series

Logo TL20 The range of LOGO series type TL20 contactors, which are both compact in size and powerful, has been designed in accordance with the safety requirements as set out in the EUROPEAN DIRECTIVE CEE 89/392 as well as with Norms CEI EN 60947-4-1 and EN 1175-1. The products included in the range are suitable for the traction and material handling sectors using direct current and can be applied to lift trucks, industrial cleaning machines, various services on board ships and boats as well as to road and rail transport vehicles

Ravioli D.c. contactors Logo - TL40 series

Logo TL40The LOGO series type TL40 contactors, which are very powerful, has been designed in accordance with the safety requirements as set out in the EUROPEAN DIRECTIVE CEE 89/392 as well as with Norms CEI EN 60947-4-1 and EN 1175-1. The products included in the range are suitable for the traction and material handling sectors using direct current and can be applied to lift trucks, industrial cleaning machines, various services on board ships and boats as well as to road and rail transport vehicles

Ravioli D.c. contactors  Team series

team3   The range of TEAM monobloc motor reversers has been designed to be particularly suitable for traction and handling in direct current and especially for: lift trucks, sweepers and industrial cleaning machines, services on board ships as well as vehicles for road and rail transport. TEAM motor reversers TE106C / TE156 C (two single pole contactors with 1 NO 1 NC contacts) and TE106 / TE156 (two single pole contactors with 1 NO contacts) are provided with internal electric connections. The result is a compact and completely protected product

 





Ravioli Spa hakkında daha fazla bilgi için tıklayınız...

© copyright 2007