Çalışmalarımızdaki en büyük referansımız, geride bıraktığımız başarı dolu

Ametek Gemco - Linear Feedback

 

Ametek Gemco Linear Feedback

Ametek Gemco

953 VMAX LDT
The new GEMCO® 953 Series VMAX Linear Displacement Transducer (LDT) from AMETEK Automation & Process Technologies was developed to meet the most demanding processing challenges, regardless of application or operating environment.The highly versatile VMAX LDT offers absolute accuracy and reliability with high resolution and precision repeatability. The VMAX LDT is resistant to contaminants and environmental conditions and is IP68 rated. Its rugged and durable mill-duty construction exceeds competitive offerings. Its vibration resistance is lab tested at 30 Gs and shock resistance is lab tested at 1000 Gs. The unit’s sleek housing offers unlimited installation flexibility. The LDT is easy to install and set up. It features the latest generation of magnetostrictive position-sensing technology with automatic gain circuitry and factory calibrated zero point. Custom configurations are available to meet specific end user requirements

Ametek Gemco

 

950IS Intrinsically Safe LDT
 

Intrinsically Safe LDT - The 950IS is an intrinsically safe analog system.  The system uses a remote transmitter mounted in a safe area wired through intrinsically safe barriers to the LDT, which may be mounted in a hazardous area.  The term 'Intrinsically Safe' pertains to a device's inability to produce an electrical spark of enough significance to cause ignition. This system incorporates circuitry that is U.L. listed for use in Class I, Groups C and D, Class II, Groups E, F and G, and Class III hazardous locations.     

Ametek Gemco

 

950MD Mill Duty Housing LDT

 

Mill Duty Housing -The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature environments such as those found in heavy industrial plants and processes. In addition, it is also used where Nema 4 protection is required or where mounting limitations exist.

Ametek Gemco

 

951 Ouick-Stik II LDT

 

Quik-Stik II LDT -The Series 951 Quik-Stik II is a high accuracy, high-speed “rod style” non-contact linear transducer, available in stroke lengths up to 300". The Quik-Stik II is highly featured with a variety of analog, velocity and pulsed outputs.  The Quik-Stik II can be programmed via a hand held programmer or a PC. The Quik-Stik II LDT, with its high resolution and industrial construction, is at home in areas such as assembly automation, material handling, robotics, and any other industrial area where highly accurate and reliable continuous linear position sensing is needed.

Ametek Gemco

 

952 BlueOx LDT

 

BlueOX LDT - The Series 952 BlueOx is designed for applications where high accuracy, high speed, and survival are important.  It is lab tested and field proven to stand up to high shock and vibration. With test results of 2,000 G's of shock and 30 G's of random vibration without false signals or mechanical damage, the BlueOx is ready to perform on the most demanding applications. The BlueOX has standard outputs and connectors that can easily replace competitive brand transducers. It is available in stroke lengths up to 168".

Ametek Gemco

 

925 Linear Cable Reel Sensor

 

The series 925 Linear Cable Reel Sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring motor assembly attached to a precision machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor. The Series 925 Linear Cable Reel Sensor can be used with our Series 1746 Resolver Input Card and a Series 2120 PLC Transducer Module.The 925 Cable Reel also provides accurate position feedback for linear motion up to 100 feet. Mounting for either resolver, encoder, cam switch or rotary potentiometer.

Ametek Gemco

 

955A BRIK Gen III LDT

 

The 955A BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.

Ametek Gemco

 

955C BRIK Gen III LDT

 

The 955CA BRIK Gen III is an accurate programmable, auto tuning,non-contact, linear displacement transducer in an economical, low profile package. The transducer utilizes our field proven magnetostrictive technology to give absolute position, repeatable to .006% of the programmable sensing distance. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The unit is designed to mount on top of a pneumatic cylinder and detect the movable magnet within the cylinder. It can be ordered with a 0-10 VDC or 4-20 mA output.

Ametek Gemco

 

955D BRIK Gen III LDT

 

The 955D BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.

Ametek Gemco

 

955DQ BRIK Gen III LDT

 

The 955DQ BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955DQ BRIK is an accurate, auto-tuning, non-contact linear displacement transducer in an economical, low profile package with direct quadrature output.

Ametek Gemco

 

955LC BRIK LDT

 

The 955LC BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955LC BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. Units can be ordered in span lengths up to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the transducer in guide tracks.

Ametek Gemco

 

955S Smart BRIK LDT


The 955S BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955S Smart BRIK is designed for applications where economical continuous feedback is necessary. The sensor can be a cost effective replacement to limit and proximity sensors and linear potentiometers. Applications include presses, blow molding, injection molding, extruding, roll positioning and many more. 

Ametek Gemco

 

956 BLOK Housing Option


The 956 BLOK is an optional housing for the 955 Brik LDT. This housing adds a chamber, magnet and piston. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The piston assembly moves over the sensing element that determines the position and converts it to a readable output. The BLOK is a self-contained unit and does not have a can or a head assembly

 

Ametek Gemco - Linear Feedback ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır. 

Ametek Gemco - Linear Feedback hakkında daha fazla bilgi için tıklayınız.