DURAG Combined Probe Sensor D-RX 250
|
Single rod measurement probe for simultaneous measurement of
|
 |
|
Features |
|
 |
Only one probe / installation opening in the exhaust gas channel |
|
Compact design, no moving parts, no consumable parts |
|
Continuous conversion to normalised dust concentration in mg/Nm3 and to normalised volume flow in Nm3/h |
|
LCD display in mg/Nm3, Nm3/h, °C and hPa, one analog output for each measurement value |
|
Parameterization at the control unit without the need of a PC or other tools |
|
Remote connection of control and evaluation unit via two-wire bus interface up to 1000 m. |
|
Applications |
|
 |
For measurements in accordance with TI Air (Technical Instructions for Maintaining Air Purity), 13., 17. and 27. BImSchV |
| x |
Not suitable for use behind electrostatic precipitators. Please consult us. |
|
|
|
|
measurements |
dust concentration, volume flow, pressure, |
|
measuring ranges |
0–10 ... 0–500 mg/Nm3 |
|
measuring principle |
dust: tribo electric |
|
flue gas temperature |
above dew point up to 200°C, optional up to 350°C, |
|
flue gas pressure |
-200 up to200 hPa |
|
duct diameter |
0.3–4 m |
|
ambient temperature |
-20 up to +50°C |
|
protection |
IP65 |
|
measuring outputs |
4x 0 / 4–20 mA / 500 Ohm, |
|
digital outputs |
7 relay outputs, permissable load 250 V / 100 VA |
|
digital inputs |
6 potential free inputs |
|
accuracy |
<2% of measuring range |
|
detection limit |
<2% of measuring range |
|
reference point drift |
<1% of measuring range/month |
|
zero point drift |
<1% of measuring range/month |
|
supply voltage |
115 / 230 VAC, 50 / 60 Hz, 50 VA |
|
dimensions (H x W x D) |
probes: 180 x 180 x (340 + probes length) mm |
|
weight |
probe 9,5 kg |
|
probe back purging (option) |
purge air supply 3 bar |
|
insulator purging (option) |
ontinuous purge air supply approx. 2 m3/h |
|
remarks |
1) flue gas velocity >5 m/s |
DURAG Tribo-Electric Combination Filter Monitors and Dust Monitors
|
Single rod measurement probe for simultaneous measurement of
|
|
|
Features |
|
|
Only one probe / installation opening in the exhaust gas channel |
|
Compact design, no moving parts, no consumable parts |
|
Continuous conversion to normalised dust concentration in mg/Nm3 and to normalised volume flow in Nm3/h |
|
LCD display in mg/Nm3, Nm3/h, °C and hPa, one analog output for each measurement value |
|
Parameterization at the control unit without the need of a PC or other tools |
|
Remote connection of control and evaluation unit via two-wire bus interface up to 1000 m. |
|
Applications |
|
|
For measurements in accordance with TI Air (Technical Instructions for Maintaining Air Purity), 13., 17. and 27. BImSchV |
| x |
Not suitable for use behind electrostatic precipitators. Please consult us. |
|
|
|
|
measurements |
dust concentration, volume flow, pressure, |
|
measuring ranges |
0–10 ... 0–500 mg/Nm3 |
|
measuring principle |
dust: tribo electric |
|
flue gas temperature |
above dew point up to 200°C, optional up to 350°C, |
|
flue gas pressure |
-200 up to200 hPa |
|
duct diameter |
0.3–4 m |
|
ambient temperature |
-20 up to +50°C |
|
protection |
IP65 |
|
measuring outputs |
4x 0 / 4–20 mA / 500 Ohm, |
|
digital outputs |
7 relay outputs, permissable load 250 V / 100 VA |
|
digital inputs |
6 potential free inputs |
|
accuracy |
<2% of measuring range |
|
detection limit |
<2% of measuring range |
|
reference point drift |
<1% of measuring range/month |
|
zero point drift |
<1% of measuring range/month |
|
supply voltage |
115 / 230 VAC, 50 / 60 Hz, 50 VA |
|
dimensions (H x W x D) |
probes: 180 x 180 x (340 + probes length) mm |
|
weight |
probe 9,5 kg |
|
probe back purging (option) |
purge air supply 3 bar |
|
insulator purging (option) |
ontinuous purge air supply approx. 2 m3/h |
|
remarks |
1) flue gas velocity >5 m/s |
DURAG MARKASINA A?T ?R?N GRUPLARI