Microwave level sensor Model:MBF

Microwave sensor

MBF	Microwave type level sensor
	Stable operation under severe environment because of using microwave

This device is a through-beam type microwave sensor. This is suitable for waste level detection in hopper at waste processing facility.

Model No.	MBF-26T(Transmitter) MBF-26R(Receiver)	MBF-23T(Transmitter) MBF-23R(Receiver)
Applied microwave	24.15GHz
Oscillating output	10mW
Setting distance	5m or less(Max. 50m)
Antenna directive angle	17°
Control output(Receiver)	1C relay, excited when microwave is received(250VAC 4A cosφ=1, 30VDC 3A)
Timer	ON delay, adjustable during 0.1 to 10sec
Power source	24VDC(18 to 30VDC both projector and receiver)	100 to 230VAC(85 to 250VAC) 50/60Hz(both projector and receiver)
Power consumption	3W or less : transmitter 4W or less : receiver	3.2VA or less : transmitter 4VA or less : receiver
Ambient temperature	-10 to +50 degrees C
Ambient humidity	45 to 85%RH
Vibration resistance	Double amplitude 1.5mm 10 to 55Hz each 2 hour in X, Y and Z direction
Impact resistance	196m/s², Each 3 time in X, Y and Z directions
Insulation resistance	20MΩ or more(by 250VDC megger) between power/contact output and case	20MΩ or more(by 500VDC megger) between power/contact output and case
Protective structure	IP64(IEC standard)
Installation	Flange installation(in conformity with JIS B2210, nominal diameter 65)
Case material	Body : aluminum die-casting, cover : acrylic resin
Weight	Each approx. 2.5kg