Greatest reference in our business is our successful past

Model 305

Model 305
Model 305
Three Conductors,
4 Amps

 


Stainless steel ball bearing standard
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
305 3 0-250 4 200

<1m

1800 140 (60) /45(7) 100

>25M

305-L 3 0-250 4 200

<1m

1000 140 (60) /-20(-29) 100

>25M

"L" designator indicates  low temp.
305 Accessories
593
three contact receptacle w/ 6" wires (18 AWG)
553
three contact cap
w/solder lugs
 

Receptacle used for mounting to rotating device.
Accessories required for wire connections.  Order Separately.

 
305 Connections

Note:  The outer shell of the metal receptacle used for mounting is electrically conductive.
305 Suggested Mounting Methods
Model 305 is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Receptacle Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
593 .408"    (10.36) .35"    (8.89)
*Inch (mm) Tolerance Ø    +.001" (+.025)    
    -.000" (-.000)    









Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Back Top Top

More Info Price

Model 330

Model 330
Model 330
Three Conductors,
30 amps

 


Disconnects included (6 lg.)
Boot kit available
Available with stainless steel ball bearing (330-SS)
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
330 3 0-250 30 100

<1m

1200 140 (60) /-20(-29) 300

>25M

330-SS 3 0-250 30 100

<1m

1200 140 (60) /-20(-29) 300

>25M

"SS" designator indicates stainless steel ball bearing  (recommended for wet or corrosive environments)

330 Accessories
55251
Terminal 16 - 14 AWG
(qty. 3 included)
57430
Boot Kit for dust or splash protection
IP51
55253
Shrink Tube (qty. 3 included)
55252
Terminal 16 - 14 AWG (qty. 3 included)
 

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

 

330 Standard Wire Connections

330 Wire Connections With Optional Boot Kit

330 Suggested Mounting Methods
Model 330 is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
330 et al 1.248"    (31.70) .80"    (20)
     

Typical Bushing Mount Hole Dimensions

330 et al .625"    (15.88) .40"    (10)
*Inch (mm) Tolerance Ø    +.001" (+.025)    
     -.000" (-.000)    











Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Back Top Top

More Info Price

Model 331

Model 331
Model 331
Three Conductors,
2@4amps, 1@30amps

 


Disconnects included
(4 sm., 2 lg.)
Boot kit available
Available with stainless steel ball bearing (331-SS)
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
331 3 0-250 2@4/1@30 100

<1m

1800 140 (60) /-20(-29) 200

>25M

331-SS 3 0-250 2@4/1@30 100

<1m

1800 140 (60) /-20(-29) 200

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

331 Accessories
55251
Terminal 16 - 14 AWG
(qty. 1 included)
57230
Boot Kit for dust / splash protection
IP51
55250
16 - 14 AWG (qty. 1 included)
55110
22 - 18 AWG (qty. 4 included)
 

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

 

331 Standard Wire Connections

331 Wire Connections With Optional Boot Kit

331 Suggested Mounting Methods
Model 331 is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
331 et al .998"    (25.35) .80"    (20)
     
Typical Bushing Mount Hole Dimensions
331 et al .500"    (12.70) .40"    (10)
*Inch (mm) Tolerance Ø    +.001" (+.025)    
     -.000" (-.000)    











Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Back Top Top

More Info Price

Model 335

Model 335
Model 335
Three Conductors,
3@30amps & 500V

 


Disconnects included (6 lg.)
Boot Kit available
Available with stainless steel
  ball bearing (335-SS)
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
335 3 0-500 30 100

<1m

500 140 (60) /-20(-29) 700

>50M

335-SS 3 0-500 30 100

<1m

500 140 (60) /-20(-29) 700

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

335 Accessories
57335
Boot Kit for dust or splash
protection IP51
55250
Terminal 16 - 14 AWG
(qty. 3 included)
55251
Terminal 16 - 14 AWG
(qty. 3 included)
 
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
 
335 Standard Wire Connections

335 Wire Connections With Optional Boot
  335 Suggested Mounting Methods
Model 335 is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
335, et al 1.575"    (40.0) .80"    (20.3)
     

Typical Bushing Mount Hole Dimensions

335, et al .984"    (25.0) .80"    (20.3)
*Inch  (mm) Tolerance Ø   +.001" (+.025)    
    -.000" (-.000)    











Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions

Back Top Top

More Info Price

MERCOTAC MARKASINA A?T ?R?N GRUPLARI

1-One Conductors
1-One Conductors
2-Two Conductors
2-Two Conductors
3-Three Conductors
3-Three Conductors
4-Four Conductors
4-Four Conductors
6-Six Conductors
6-Six Conductors
8-Eight Conductors
8-Eight Conductors
A-Company
A-Company
B-FAQ
B-FAQ
MERCOTAC_Model 215-2K Two Conductors
MERCOTAC_Model 215-2K Two Conductors
PRODUCT OVERVIEW
PRODUCT OVERVIEW
SPECIFICATIONS  OVERVIEW
SPECIFICATIONS OVERVIEW
Technical
Technical
USING SLIP RINGS?
USING SLIP RINGS?