Greatest reference in our business is our successful past

SIKO

 

SIKO AP04 series
SIKO factory programmed version of AP04
Order code: AP04-0002
SIKO GMBH
 
 
 
AP05-RS485 / SIKONETZ5-20-A-OZP-IP53-EX-SW05
SIKO A05, with RS485 / SIKONETZ5, with 20mm diameter hollow shaft, Fixed, without an intermediate plate, with IP53 moisture protection, with industrial connector sockets, software compatible with AP04-SN5
Order code: AP05-0001
SIKO GMBH
 
 
 
 
AP05-RS485 / SIKONETZ5-20-A-OZP-IP65-EX-S 
SIKO A05, with RS485 / SIKONETZ5, with 20mm diameter hollow shaft, Fixed, without an intermediate plate, with IP65 moisture protection, with industrial connector sockets, standard AP05 software.
Order code: AP05-0003
SIKO GMBH
 
 
 
 
SIKO AP10
SIKO AP10, CANopen, 20mm, @ 30mm distance, IP65 protection, foil window
Order code: AP10-CAN-20-A-II-IP65-EX-SF-S
SIKO GMBH
 
 
 
 
SIKO AP10S
SIKO AP10S, with RS485 / SIKONET Z5 interface, IP65 moisture protection, with foil view window
Order code: AP10S-S3/09-IP65-EX-SF-S
SIKO GMBH
 
 
 
 
ETC5000
SIKO ETC5000 LCD touch control panel, 7in (177mm) diagonal display, IP65 front panel moisture protection, RS485 / SIKONETZ5 interface / protocol, standard software.
Order code: ECT5000-7-IP65-S3/09-S
SIKO GMBH
 
 
 
 
SIKO AG02 fieldbus actuator
SIKO AG02-55,3-70W-M-KR/14-OD-LA-ABM-OMS-PB-SW
Order code: AG02-0166
SIKO GMBH
 
 
 
 
SIKO AG02 fieldbus actuator
SIKO AG02-66.2-70W-M-KR/14-D-B-LA-ABM-0MS-S1/100-OFB-SW
Order code: AG02-0092
SIKO GMBH
 
 
 
SIKO AG03 fieldbus actuator
SIKO-AG03-48-50W/M-IP50-KR/14-B-E12-ABM-OMS-PB-SW
Order code: AG03-0012
SIKO GMBH
 
 
 
 
SIKO AG05-fieldbus actuator
SIKO AG05 Fieldbus, gear ratio of 66, motor power of 50W, with IP54 moisture protection, ABM, with RS485 / SIKONETZ5
Order code: AG05 Fieldbus-66-50W-IP54-KR/14-A-ABM-S3/09
SIKO GMBH
 
 
 
 
SIKO AG06 fieldbus actuator
SIKO AG06 Fieldbus, Gear Ratio i=188, Motor Power 50W, with IP54 moisture protection, B, ABM, with RS485 / SIKONETZ5, SW
Order code: AG06 Fieldbus-188-50W-IP54-KR/20-B-ABM-S3/09-SW
SIKO GMBH
 
 
 
 
SIKO DE04 programmable digitial indicator
SIKO DE04 programmable digital indicator, for horizontal spindle, standard model, decimal point = 0000.0, display divisor = 1, cw increasing, without delay, with 16mm hollow shaft, red housing, cylindrical torque pin, 2 year battery service life
Order code: DE04-02-300-1-1-i-D-RH16-R-A-B2
SIKO GMBH
 
 
 
SIKO DKE01 handwheel
SIKO DKE01 programmable indicator and handwheel
Order code: DKE01-0001
SIKO GMBH
 
 
 
SIKO DE04 and DE10 programming software for PC with USB 2.0 interface.
Order code: ProTool DE
SIKO GMBH
 
 
 
SIKO DE10 programmable display
SIKO DE10 digital indicator, for horizontal spindle, standard model, decimal point = 0000.0, display divisor = 1, cw increasing, without delay, with 30mm hollow shaft, Red housing, cylindrical torque pin, 2 year battery service life
Order code: DE10-02-...-1-1-i-D-RH30-R-A-B2
SIKO GMBH
 
 
 
 
SIKO DE10P user programmable
SIKO DE10P-30-O-S-IP65, DE10P, 30mm hollow shaft, orange body, Stainless Steel sleeve, IP65 sealing.
Order code: DE10P-0001
SIKO GMBH
 
 
 
 
DA04-02-0010-1-E-RH14-O-A-0-O-0
SIKO DA04, 02 view window, 10 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0010-1-E-RH14-O-A-0-O-0
SIKO GMBH
 
 
DA04-02-0010-1-I-RH14-O-A-0-O-0
SIKO DA04, 02 view window, 10 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0010-1-I-RH14-O-A-0-O-0
SIKO GMBH
 
 
 
 
DA04-02-0017/5-1-E-RH14-O-A-0-O-0
SIKO DA04, 02 view window, 17/5 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0017/5-1-E-RH14-O-A-0-O-0
SIKO GMBH
 
 
 
 
DA04-02-0017/5-1-I-RH14-O-A-0-O-0
SIKO DA04, 02 view window, 17/5 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without axial seal, no intermediate plate
Order code: DA04-02-0017/5-1-I-RH14-O-A-0-O-0
SIKO GMBH
 

DA04-02-0020-1-E-RH14-O-A-0-O-0 

SIKO DA04, 02 view window, 20 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate.
Order code: DA04-02-0020-1-E-RH14-O-A-0-O-0
SIKO GMBH

 

DA04-02-0020-1-I-RH14-O-A-0-O-0

SIKO DA04, 02 view window, 20 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate.
Order code: DA04-02-0020-1-I-RH14-O-A-0-O-0
SIKO GMBH

 

DA04-02-0030-1-E-RH14-O-A-0-O-0

SIKO DA04, 02 view window, 30 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0030-1-E-RH14-O-A-0-O-0
SIKO GMBH

 

DA04-02-0030-1-I-RH14-O-A-0-O-0

SIKO DA04, 02 view window, 30 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0030-1-I-RH14-O-A-0-O-0
SIKO GMBH

 

DA04-02-0050-1-E-RH14-O-A-0-O-0 
SIKO DA04, 02 view window, 50 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0050-1-E-RH14-O-A-0-O-0
SIKO GMBH

 

DA04-02-0060-1-E-RH14-O-A-0-O-0 
SIKO DA04, 02 view window, 60 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0060-1-E-RH14-O-A-0-O-0
SIKO GMBH

 

DA04-02-0060-1-I-RH14-O-A-0-O-0 
SIKO DA04, 02 view window, 60 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
Order code: DA04-02-0060-1-I-RH14-O-A-0-O-0
SIKO GMBH

 

DA09S-0010
SIKO DA09S digital indicator, view window 02, 00025 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
Order code: DA09S-02-00025-2-e-RH20-O-A-K-OAD-OZP-BP-ORP
SIKO GMBH

 

 

DA09S-0114
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
Order code: DA09S-02-00020-1-e-RH20-O-A-K-OAD-OZP-BP-ORP
SIKO GMBH

 

DA09S-02-00030-1-e-RH20-O-A-K-OAD-OZP 
SIKO DA09S digital indicator, view window 02, 00030 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
Order code: DA09S-02-00030-1-e-RH20-O-A-K-OAD-OZP
SIKO GMBH

 

DA09S-02-00030-1-i-RH20-O-A-K-OAD-OZP
SIKO DA09S digital indicator, view window 02, 00030 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
Order code: DA09S-02-00030-1-i-RH20-O-A-K-OAD-OZP
SIKO GMBH

 

DA09S-02-00040-1-e-RH20-O-A-K-OAD-OZP
SIKO DA09S digital indicator, view window 02, 00040 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
Order code: DA09S-02-00040-1-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00040-1-i-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00040 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate

Order code: DA09S-02-00040-1-i-RH20-O-A-K-OAD-OZP
SIKO GMBH

 

DA09S-02-00050-1-e-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00050 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate

Order code: DA09S-02-00050-1-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00050-1-i-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00050 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate

Order code: DA09S-02-00050-1-i-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00060-1-e-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00060 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-02-00060-1-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00060-1-i-RH20-O-A-K-OAD-OZP 

SIKO DA09S digital indicator, view window 02, 00060 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate

Order code: DA09S-02-00060-1-i-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00100-1-e-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00100 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-02-00100-1-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00100-1-i-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00100 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-02-00100-1-i-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-00200-0-i-RH20-O-A-K-OAD-OZP-BP-ORP 

SIKO DA09S digital indicator, view window 02, 00200 display after one revolution, comma position 0 (00000), CW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, g

Order code: DA09S-3322

SIKO GMBH


DA09S-02-00400-2-e-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 00400 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate

Order code: DA09S-02-00400-2-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-02-01000-1-e-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 02, 01000 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-02-01000-1-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-0233

SIKO DA09S digital indicator, view window 02, 00015 display after one revolution, comma position 1 (0000.0), CCW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows

Order code: DA09S-02-00015-1-e-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-0260

SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows

Order code: DA09S-02-00020-1-i-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-04-00025-1-e-RH-20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 04, 00025 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-04-00025-1-e-RH-20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-04-00040-1-e-RH-20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 04, 00040 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-04-00040-1-e-RH-20-O-A-K-OAD-OZP

 

SIKO GMBH

 

DA09S-04-00040-1-i-RH-20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 04, 00040 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-04-00040-1-i-RH-20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-0416

SIKO DA09S digital indicator, view window 02, 00010 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate

Order code: DA09S-02-00010-1-i-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-0433

SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.

Order code: DA09S-02-00020-2-e-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-0434

SIKO DA09S digital indicator, view window 02, 00010 display after one revolution, comma position 1 (0000.0), CCW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows

Order code: DA09S-02-00010-1-e-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-0648

SIKO DA09S digital indicator, view window 02, 00015 display after one revolution, comma position 1 (0000.0), CW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows

Order code: DA09S-02-00015-1-i-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-07-00020-1-i-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 07, 00020 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-07-00020-1-i-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-07-00030-1-e-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 07, 00030 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-07-00030-1-e-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-07-00030-1-i-RH20-O-A-K-OAD-OZP

SIKO DA09S digital indicator, view window 07, 00030 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.

Order code: DA09S-07-00030-1-i-RH20-O-A-K-OAD-OZP

SIKO GMBH

 

DA09S-0703

SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 2 (000.00), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.

Order code: DA09S-02-00020-2-i-RH20-O-A-K-OAD-OZP-BP-ORP

SIKO GMBH

 

DA09S-10mm reduction sleeve

SIKO DA09S reduction sleeve, 20mm OD to 10mm ID

Order code: DA09S-RH01-10

SIKO GMBH

 

DA09S-12mm reduction sleeve

SIKO DA09S reduction sleeve, 20mm OD to 12mm ID

Order code: DA09S-RH01-12

SIKO GMBH

 

DA09S-16mm reduction sleeve

SIKO DA09S reduction sleeve, 20mm OD to 16mm ID

Order code: DA09S-RH01-16

SIKO GMBH

 

DA09S-18mm reduction sleeve

SIKO DA09S reduction sleeve, 20mm OD to 18mm ID

Order code: DA09S-RH01-18

SIKO GMBH

 

DA09S-8mm reduction sleeve

SIKO DA09S reduction sleeve, 20mm OD to 8mm ID

Order code: DA09S-RH01-08

SIKO GMBH


DA09S-axial seal

SIKO DA09S axial seal

Order code: DA09S-AS

SIKO GMBH

 

DA09S-Intermediate Plate

SIKO intermediate plate to pad out the depth of the DA09S type A pin to match the depth of the older model, DA09, type A pin.

Order code: DA09S-ET-0001

SIKO GMBH

 

DA10-12-00020-1-E-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00020 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00020-1-E-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-12-00020-1-I-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00020 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00020-1-I-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-12-00040-1-I-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00040 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00040-1-I-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-12-00050-1-E-RH25-WL-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00050 display value after 1 revolution, decimal position 1 (0000.0), CCW increasing, 25mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00050-1-E-RH25-WL-A-1-O-0

SIKO GMBH

 

DA10-12-00050-1-I-RH25-WL-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00050 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00050-1-I-RH25-WL-A-1-O-0

SIKO GMBH

 

DA10-12-00063/5-1-E-RH30-WL-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00063/5 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00063/5-1-E-RH30-WL-A-1-O-0

SIKO GMBH

 

DA10-12-00063/5-1-I-RH30-WL-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00063/5 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00063/5-1-I-RH30-WL-A-1-O-0

SIKO GMBH

 

DA10-12-00100-1-I-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 12, 00100 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-12-00100-1-I-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-14-00025-1-E-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-14-00025-1-E-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-14-00025-1-I-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-14-00025-1-I-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-16-00060-1-E-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 16, 00060 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-16-00060-1-E-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-16-00060-1-I-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 16, 00060 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-16-00060-1-I-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-17-00060-1-E-RH30-WK-A-1-O-0

SIKO DA10 digital position indicator, view window 17, 00060 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal

Order code: DA10-17-00060-1-E-RH30-WK-A-1-O-0

SIKO GMBH

 

DA10-17-00060-1-i-RH25-WK-A-II-O-K-AD-BP

SIKO DA10 digital position indicator, view window 17, 00060 display value after 1 revolution, decimal position 1 (0000.0), CW increasing, 25mm hollow shaft, design WK, (grub screw), type A torque pin, at position II, orange housing, plastic view window, w

Order code: DA10-17-00060-1-i-RH25-WK-A-II-O-K-AD-BP

SIKO GMBH

 

Reducing sleeve from 25 mm to 22 mm

SIKO DA10 series reducing sleeve OD=25mm, ID=22mm diameter for hollow shaft design type WL.

Order code: DA10-RH03-22

SIKO GMBH

.

Reducing sleeve from 30mm to 22mm 

SIKO DA10 series reducing sleeve ID=22mm diameter for hollow shaft design type WK.

Order code: DA10-RH02-22

SIKO GMBH

 

Reducing sleeve from 30mm to 24mm 

SIKO DA10 series reducing sleeve ID=24mm diameter for hollow shaft design type WK.

Order code: DA10-RH02-24

SIKO GMBH

 

Reducing sleeve from 30mm to 25mm

SIKO DA10 series reducing sleeve ID=25mm diameter for hollow shaft design type WK.

Order code: DA10-RH02-25
SIKO GMBH


SIKO DA10R/1-0001

SIKO DA10R/1 series, 00040 display after first revolution, comma position 1 (0000.0), ccw increasing, with 25mm hollow shaft, design WL, (knurled screw), type B torque pin, position II, natural black case, with plastic window, with an axial seal

Order code: DA10R/1-00040-1-e-25-WL-B-II-S-K-AD

SIKO GMBH

 

 

SIKO DA10R/1-0003 

SIKO DA10R/1 series, 00020 display after first revolution, comma position 1 (0000.0), cw increasing, with 25mm hollow shaft, design WL, (knurled screw), type B torque pin, position II, natural black case, with plastic window, with an axial seal

Order code: DA10R/1-00020-1-i-25-WL-B-II-S-K-AD

SIKO GMBH

 

SIKO DK01-100

SIKO DigiTurn DK01, 0100 display value after 1 turn, comma position at 1, e = counter - clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)

Order code: DK01-100-1-e-14-RA-FR

SIKO GMBH

 

SIKO DK01-100

SIKO DigiTurn DK01, 0100 display value after 1 turn, comma position at 1, i = clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)

Order code: DK01-100-1-i-14-RA-FR

SIKO GMBH

 

SIKO DK01-12/5

SIKO DigiTurn DK01, 0012/5 display value after 1 turn, no comma position, i = clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)

Order code: DK01-12/5-0-i-14-RA-FR

SIKO GMBH

 

SIKO DK02-25

SIKO DK02 DigiTurn, version 08 for left side panels, 0025 display value after 1 turn, comma position at 1, i = clockwise increasing, 14 mm hollow shaft bore diameter, with knurled handle, fire red handwheel colour (RSL3000)

Order code: DK02-08-25-1-i-14-RA-FR

SIKO GMBH

 

SIKO DK03-10

SIKO DK03 analogue indicator, gear ratio of 10, clockwise increasing, geared red pointer + black pointer 1:1 ratio, normal scale, 1 colour, 14 mm hollow shaft diameter, torque pin @ 270 °, with knurled handle, fire red handwheel colour (RSL3000)

Order code: DK03-10-i-2-N-C1-14-270-ST-FR

SIKO GMBH

 

MA503/1-EG40H-7-L-2.0-0.3-I

SIKO MA503/1 magnetic display meter, panel mount housing, with tilting mounting bracket attached, 3.0Vdc operating voltage, rectangular with elongated mounting holes, 2.0 Cable length in metres, 0.3 power supply cable length in mm, Intergrated battery com

Order code: MA503/1-0085

SIKO GMBH

 

MSK5000-5-E6/01.0/19.0-LD-O-0.010-1.0

SIKO MSK5000 magnetic tape sensor, 5Vdc operating voltage, with L1 cable+E6 connector+E6 socket, 01.0 m L1 cable, 19.0 m L2 cable, with RS422 output, without reference signal, 0.01mm linear resolution, 1 µsec pulse interval

Order code: MSK5000-0174

SIKO GMBH

 

 

MB500 magnetically encoded strip for 0.9m

SIKO MB500 magnetic strip, 1.0 m ordered length, 10mm width, with 0.1mm precision, with stainless steel cover strip, without a reference point

Order code: MB500-1.0-10-0.1-AM-O

SIKO GMBH

 

 

MB500 magnetically encoded strip for 3.0m.

SIKO MB500 magnetic strip, 3.1 m ordered length, 10mm width, with 0.1mm precision, with stainless steel cover strip, without a reference point

Order code: MB500-3.1-10-0.1-AM-O

SIKO GMBH

 

 

MSK5000-5-E8x-3.0--LD-O-0.010-1.0

SIKO MSK5000 magnetic tape sensor, for 5Vdc operating voltage, with E8 connector, 3.0 metre of cable, with RS422 output, without reference signal, linear resolution per mm, with 1 µsec pulse interval. (matches with MA10/a-0119)

Order code: MSK5000-0046

SIKO GMBH

 

SIKO (A) LSA200 magnetic strip with rail

SIKO LSA200 guided rail system with 2.0 metre cable and D-SUB connector (for AEA translation module), to measure (500mm - 90mm)=410mm

Order code: LSA200-E8/02.0-00.50

SIKO GMBH

 

SIKO (A) LSA200 magnetic strip with rail

SIKO LSA200 guided rail system with 2.0 metre cable and mini-DIN connector (for MA505 combined translation module and LCD display) to measure (500mm - 90mm)=410mm

Order code: LSA200-E10/ 2.0-0.5

SIKO GMBH

 

SIKO (A,B) AEA translation module

SIKO translation module type AEA, SSI bus interface, 4=24Vdc, S1/00=RS232 interface std, MSA sensor with D-SUB connector.

Order code: AEA-SSI-4-S1/00-MSA

SIKO GMBH

 

SIKO (A,B) MA505 translation module and readout

SIKO combined translation module and LCD display, EG-panel mount (92x45mm), 4=24Vdc, XX/XX=without interface, SO=without interface socket, S=with software, MSA interface connector.

Order code: MA505-EG-4-KM-XX/XX-SO-S-MSA

SIKO GMBH

 

SIKO (B) MBA series magnetic strip

SIKO MBA magnetic strip, 5m length, with stainless steel cover strip, self adhesive backing tape (for use with (B) sensors and translation modules.

Order code: MBA-5-AM

SIKO GMBH

 

SIKO (B) MSA magnetic sensor

SIKO MSA magnetic sensor with type A with 2.0 meter cable terminated with 9pin D-SUB for interface to AEA translation module

Order code: MSA-A-E8/2.0

SIKO GMBH

 

SIKO (B) MSA magnetic sensor

SIKO MSA magnetic sensor with type A with 2.0 meter cable terminated with mini-DIN connector for interface to MA505 translation module and LCD display.

Order code: MSA-A-E10/2.0

SIKO GMBH

 

 

SIKO (B) MSA510 cable for EX version

SIKO cable with connector for MSA510 sensor with W=right angle connector, 1.0= 1metre cable length.

Order code: KV07-0-W-1.0

SIKO GMBH

 

 

SIKO (B) MSA510 combined sensor and translation module

SIKO combined sensor and translation module type MSA510 with SSI output, I=connector on the end, EX=7 pin round connection socket. (requires ordering cable)

Order code: MSA510-SSI-I-EX

SIKO GMBH

 

SIKO (C) MBA511 magnetic strip

SIKO magnetic strip, OEM bulk roll of 90metres complete with adhesive tape backing and stainless steel cover strip. MOQ 2 metre.

Order code: MBA511-90-AM

SIKO GMBH

 

SIKO (C) MSA511 connection cable 

SIKO MSA511 connection cable with right angle connector, 1.0m cable 12 core cable.

Order code: KV12-0-W-1.0

SIKO GMBH

 

SIKO (C) MSA511 magnetic sensor 

SIKO combined magnetic sensor and translation module with SSI (RS422) interface signal for 20480mm maximum measurement length (use with MBA511 magnetic strip)

Order code: MSA511-SSI

SIKO GMBH

 

SIKO MA508 MAGscale display with inboard sensor 

SIKO MA508 MAGscale LCD display, with integrated, inboard sensor.

Order code: MA508-EG-IS

SIKO GMBH

 

SIKO MA508 MAGscale display with external sensor

SIKO MA508 MAGscale LCD display, with external sensor, version ES, and 300mm cable

Order code: MA508-EG-ES-L-0.3

SIKO GMBH

 

SIKO Carridge for PSA rail 

A SIKO PSA rail carriage with threaded mounting holes matching the MAGLINE™ Basic MSK5000 head.

Order code: PSA-1C-MSK5000

SIKO GMBH

 

SIKO Profile Rail PSA

SIKO PSA profile rail of 1.0m length

Order code: PSA-1.0

SIKO GMBH

 

SIKO Profile Rail with cover

SIKO Profile Rail type PS-SB, 1.0metre in length

Order code: PS-SB-1.0

SIKO GMBH

 

SIKO Rail and Carriage Assembly

SIKO TK series track and runner assembly of 1.0m length.

Order code: TK-04-12-1-1000

SIKO GMBH

 

Summary Draw Wire Actuators 

(You cannot Order off this page but you can phone us +64 9 630 7871, 9am to 5pm NZST))

Order code: SIKO Draw Wire Actuator Summary

SIKO GMBH

 

SIKO SGH10

SIKO SGH10 for cylinders with up to 1000mm displacement

Order code: SGH10

SIKO GMBH

 

SIKO SGH10L 

SIKO SGH10L for cylinders with up to 1000mm displacement

Order code: SGH10L

SIKO GMBH

 

SIKO SGH25

SIKO SGH25 for cylinders with up to 2500mm displacement

Order code: SGH25

SIKO GMBH

 

SIKO SGH50 Hydraulic cylinder measurement 

SIKO SGH50 for cylinders with up to 5000mm displacement

Order code: SGH50

SIKO GMBH

116.

SIKO SGH Accessories 

Order code: SIKO SGH Programming tools

SIKO GMBH

 

SIKO SG5

SIKO SG5 Draw Wire Actuator, measuring range of 300mm, 3 wire potentiometer 10Kohm, electrical cable length

Order code: SG5-300mm-P10-2.0m

SIKO GMBH

 

Model RA20 Panel Meter 3.5 digit, set 0 to 500 mm 

SIKO panel meter, 3.5 digits (±1999), factory set for 0 to 500mm (1mm increments) matching SG and SGP 500mm wire actuators, Operating voltage 230Vac, 3 wire resistive input.

Order code: RA20-2-0-0-500-1-R

SIKO GMBH

 

Model SG10 300mm

Model SG10 300mm draw wire actuator - SG10-300-P10-2.0 SIKO Wire Actuator, Small Format, 300mm, 10K potentiometer, voltage output and 2m, 3 wire electrical cable. Custom made product.

Order code: SG10-300-P10-2.0

SIKO GMBH

 

Model SG10 500mm draw wire actuator

SIKO Wire Actuator, Small Format, 500mm, 10K potentiometer, voltage output and 2m, 3 wire electrical cable.

Order code: SG10-500-P10-2.0

SIKO GMBH


Model SG10 1000mm draw wire actuator

SIKO Wire Actuator, Small Format, 1000mm, 10K potentiometer, voltage output and 2m, 3 wire electrical cable.

Order code: SG10-1000-P10-2.0

SIKO GMBH

 

Model SG10 2000mm with accurate digital output 

SIKO SG10 Wire Actuator, 2000mm measuring range, incremental encoder output, 2.0 metre electrical cable length

Order code: SG10-2000 I-IGV28-0004-2.0

SIKO GMBH

 

Model SG10 2000mm draw wire actuator

SIKO Wire Actuator, Small Format, 2000mm, 10K potentiometer, voltage output and 2m, 3 wire electrical cable.

Order code: SG10-2000-P10-2.0

SIKO GMBH

 

Model SG20, 1250mm, 3 wire poteniometer.

SIKO SG20 draw wire actuated encoder, 1250mm measuring length, with 10Kohm potentiometer, with integral cable, 2 metre electrical cable length, -10°C to +80°C, IP50 protection.

Order code: SG20-1250-P10-E1-2-T1

SIKO GMBH

 

Model SG20, 2000mm, 4-20mA

SIKO SG20 draw wire actuated encoder, 2000mm measuring length, with 4-20mA loop current, with integral cable, 2 metre electrical cable length, -10°C to +80°C, IP50 protection.

Order code: SG20-2000-MWI-E1-2-T1

SIKO GMBH

 

Model SG20 2000mm, 0-10Vdc

SIKO SG20 draw wire actuated encoder, 2000mm measuring length, with 0-10Vdc voltage, with integral cable, 2.0 metre electrical cable length, -10°C to +80°C, IP50 protection.

Order code: SG20-2000-MWU-E1-2.0-T1 (SG20-0014)

SIKO GMBH

 

SIKO SG21 2000mm with absolute encoder and SSI output 

SIKO SG21 2000mm draw wire actuated encoder, with ZB4002 encoder mounting plate and WV36M/SSI encoder as quoted

Order code: SG21-WV36M/SSI-T1

SIKO GMBH

 

SIKO SG21, 2000mm with absolute encoder, CAN output

SIKO SG21 2000mm draw wire actuated encoder, with ZB4002 encoder mounting plate and MV36M/CAN encoder as quoted

Order code: SG21-WV36M/CAN-T1

SIKO GMBH

 

SIKO SG21 with incremental encoder

SG21 2000mm draw wire actuated encoder, with ZB4002 encoder mounting plate and IV28M/1 encoder as quoted

Order code: SG21-IV28M/1-T1

SIKO GMBH

 

SIKO SG30 with potentiometer 

SIKO SG30 Wire Actuator, 2000mm range, wire terminated with threaded shaft, Potentiometer 10Kohms

Order code: SG30-2000mm-GW-P10-1

SIKO GMBH

 

SIKO SG31 0-10Vdc series

SIKO SG31 draw wire actuated 0-10Vdc encoder (AV58M), plus 84109 M12 5 pin straight connector.

Order code: SG31-S6 + AV58-MWu-6-M12 + 84109

SIKO GMBH

 

SIKO SG31 4-20mA series

SIKO SG31 draw wire actuated 4-20mA encoder (AV58M), plus 84109 M12 5 pin straight connector.

Order code: SG31-S6 + AV58-MWi-6-M12 + 84109

SIKO GMBH

 

SGP series, 2750mm, voltage output 

SIKO Wire Actuator, 2750mm, stainless steel wire, type 02, 10K potentiometer, voltage output

Order code: SGP-2750-S-02-10-X

SIKO GMBH

 

SGP series, 500mm, 4-20mA ouput

SIKO Wire Actuator, 500mm, stainless steel wire, Type 01, 10K potentiometer, with intrument transformer (4-20mA)

Order code: SGP-500-S-01-10-M

SIKO GMBH

 

SGP series, 500mm, voltage output

SIKO Wire Actuator, 500mm, stainless steel wire, type 01 10K potentiometer, voltage output.

Order code: SGP-500-S-01-10-X

SIKO GMBH

 

SGP series, 6000mm, 4-20mA output

SIKO SGP series wire actuator for 6000mm, stainless steel wire, with 10K pot and 4-20mA interface with 12 to 28Vdc supply.

Order code: SGP-6000-S-02-10-M

SIKO GMBH

 

SIKO GP09 analogue shaft position for 0-170°

SIKO GP09 geared potentiometer, 0.5 gear ratio, with 20mm hollow shaft, type A torque pin, 1-turn potentiometer, 4-20mA with zero and span adjustment, CCW increasing, 2.0 metre cable length, IP52 protection.

Order code: GP09-0.5-20-A-01-MWI-e-2.0-IP52

SIKO GMBH

 

SIKO GP09 analogue shaft position for 0-257.6°

SIKO GP09 geared potentiometer, 0.74 gear ratio, with 20mm hollow shaft, type A torque pin, 1-turn potentiometer, 4-20mA with zero and span adjustment, CW increasing, 2.0 metre cable length, IP52 protection

Order code: GP09-0.74-20-A-01-MWI-i-2.0-IP52

SIKO GMBH

 

SIKO AH25S absolute rotary encoder

Order code: AH25S-001

SIKO GMBH

 

SIKO AV58M with 0 ~ 10Vdc interface 

SIKO AV58M absolute analogue encoder, with 0 ~ 10Vdc output, 6mm stainless steel shaft, with M12 electrical connector

Order code: AV58M-MWU-6-M12

SIKO GMBH


SIKO AV58M with 4-20mA interface

SIKO AV58M absolute analogue encoder, with 4 ~ 20mA output, 6mm stainless steel shaft, with M12 electrical connector

Order code: AV58M-MWI-6-M12

SIKO GMBH

 

SIKO WV36M-SSI absolute encoder for 4096 turns

SIKO WV36M/SSI, Gray coded, 4096 (12bit) PPR, Set for 4096 revolutions, 6mm shaft, 36mm mounting plate, thread 8 pin socket M12A

Order code: WV36M/SSI-G-4096-4096-6/S36-M12

SIKO GMBH

 

SIKO WV38M-CAN with 36mm shaft

SIKO WV36M/CAN series, 4096 bits per revolution, 4096 turns, 6mm shaft, 36mm mounting plate, M12 screw connector CAN signal interface

Order code: WV36M/CAN-4096-4096-6/S36-M12

SIKO GMBH

 

SV58 Series for 4096 steps per revolution

SIKO SV58 absolute encoder, Parallel output, with connector in axial position, 4096 steps per rev, Gray code, clamping type flange, 10x20mm shaft, zero set and latch pushbutton controls.

Order code: SV58-P1-E2-A-OK-4096-G-M1-10X20-SL

SIKO GMBH

 

SIKO IV5800

SIKO IV5800 series with ABO signal interface, 1000 ppr, cable with open end, axial connection, 01.0 cable / socket definition, servo flange, with LineDriver, with 6mm diameter shaft, IP65 protection class

Order code: IV5800-ABO-1000-E1-A-01.0-M2-LD-6x10-IP65

SIKO GMBH

 

SIKO IH5815 (Optical) 

SIKO IH5815 series with ABO signal interface, 1000 ppr, cable with open end, 01.0 cable / socket definition, with LineDriver output, 10mm hollow shaft, IP65 protection class

Order code: IH5815-ABO-1000-E1-01.0-LD-10-IP65

SIKO GMBH

 

SIKO IH5828 (Optical)

SIKO Incremental optical rotary encoder, 1000ppr, electrical cable of 1metre, 20mm hollow shaft.

Order code: IH5828-ABO-1000-E1-LD5-20

SIKO GMBH

 

SIKO IV28M encoder for 200ppr, ABx output.

SIKO IV28M magnetic incremental encoder, with A & B signals, 200 pulses per revolution, cable with stripped wire ends, axial, 1.0 m cable length, push-pull output signal driver, shaft of 5mm diameter and 10mm length

Order code: IV28M-ABX-200-E1-A-1.0-PP-5x10

SIKO GMBH

 

SIKO IV28M incremental encoder for 1000 pulses/revolution 

SIKO IV28M magnetic incremental encoder, with A & B signals plus O reference signal, 1000 pulses per revolution, cable with stripped wire ends, axial, 1.0 m cable length, push-pull output, shaft of 6mmx10mm

Order code: IV28M/1-ABO-1000-E1-A1.0-PP-6x10

SIKO GMBH

 

Incremental encoder for 360 pulses per revolution 

SIKO IG06 incremental encoder, AB0 output signals, 360 pulses per revolution, PVC sheath cable, stripped cable ends, 2 metres, , mounting with top and bottom flanges, push-pull output, side bearing /clamping screw, 20mm hollow shaft.

Order code: IG06-ABO-360-PVC-E1-2.0-0-M2-PP-W01-20

SIKO GMBH

 

IG07-ABX-100-E4-OK-M1-PP-W02-RS

SIKO IG07 optical incremental encoder, with A & B outputs, 100 pulses per revolution, socket with circular plug, no cable, mounting base, push-pull driver, 20mm hollow shaft with ball bearings and clamping ring, IP65 seal

Order code: IG07-3023

SIKO GMBH

 

IG07-ABO-1024-E4-OK-M1-LD-W01-RS

SIKO IG07 optical incremental encoder, with A & B signals, O reference SIKO incremental encoder, with A & B signals, O reference signal, 1024 Pulses per revolution, with circular plug, NO plug & cable, with mounting screws in body, LD5 RS422, 5Vdc operati

Order code: IG07-xxxx

SIKO GMBH

 

SIKO MBR200 series magnetic ring with 100 poles / revolution

SIKO MBR200 series magnetic ring, poles per revolution, 62.6mm diameter, with index pulse.

Order code: MBR200-100-M

SIKO GMBH

 

SIKO MBR200 series magnetic ring with 100 poles / revolution 

SIKO MBR200 series magnetic ring, poles per revolution, 62.6mm diameter, without index pulse

Order code: MBR200-100-O

SIKO GMBH

 

SIKO MR500 with 64 poles 

SIKO MR500 magnetic encoder ring, 64 poles and 102mm diameter for 200ppr to 80,000ppr, with 20mm hollow shaft and with reference point.

Order code: MR500-64-20-MNG-M

SIKO GMBH

SIKO MR500 with 64 poles

SIKO MR500 magnetic encoder ring, 64 poles and 102mm diameter for 200ppr to 80,000ppr, with 20mm hollow shaft and without reference point.

Order code: MR500-64-20-MNG-O

SIKO GMBH

 

SIKO IK360 CANopen 

SIKO IK360 series inclinometer for 0°~360°, single axis, CANopen output, addressable for up to 128 nodes.

Order code: IK360-1-CAN

SIKO GMBH

 

MA10/3 programmable panel meter with 6 digit display

SIKO panel meter setup for LASER LAS 100 specified with panel mount case, RS232 standard output, 230Vac supply. with SSI/RS422 laser input interface protocol.

Order code: MA10/3-EG-X-S1/00-1-SSI/24

SIKO GMBH

.

SIKO MA50

SIKO MA50 for measuring analogue values from poteniometer, voltage and current sources. Programmable.

Order code: MA50

SIKO GMBH

 

MA10/4 programmable electronic display

SIKO MA10/4 LCD electronic display, panel mount, 230Vac 50Hz power supply, line driver input with 5 volt supply, 25Hz response, no switching outputs, grounded earth, without interface, blue front panel, with software.
Order code: MA10/4-EG-1-LD/5-25-SO-RM-XX/XX-BS-S
SIKO GMBH

 

Türkiyede Siko  ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde s atış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

SIKO hakk?nda daha fazla bilgi i?in t?klay?n?z.