Greatest reference in our business is our successful past

Everight Linear Position Sensors

Everight Linear Position Sensors

Embedded/Port Mounted Linear Cylinder Position Sensor

The Everight Sensors L3 is an extremely robust linear position sensor designed to be embedded in, or port mounted to, a hydraulic cylinder, and reliably provide an analog current or voltage (SSI available as OEM option) output over the sensor’s measuring range while operating in a fluid power environment. Based on Everight’s proprietary, contactless NyceWave™ (DIST) Distributed Impedance Sensing Technology, the L3 employs a unique solid probe construction that is extremely robust when subjected to intense shock and vibration, and only requires a simple conductive tube target (or simply the gun drill ID of the cylinder rod) for operation, rather than a magnet or some other special target type. Contactless sensors such as the L3 are not subject to wear and experience no output signal deterioration over the life of the sensor. Field programmability is available on the L3.

L3 Linear Position Sensor
 
  • Extremely robust construction
  • Easily adapts to existing cylinder designs
  • High resolution with multiple analog output options
  • Senses cylinder rod…no need for magnet or target tube
  • Field programmability available
  • NyceWave contactless sensing for virtually infinite sensor element life
L3 Specifications
 
Operating Specifications
Measurement Range (linear) 4 inches - 30 inches (100 mm - 750 mm)
Non-linearity ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional
Noise 3 mV rms max (Voltage) ≤ 6 µA rms (Current)
Frequency Response (-3 dB) 300 Hz (nominal)
Electrical Specifications
Supply Voltage Input 9 V - 28 V DC ± 2%
Voltage Outputs 0.5 V - 4.5 V, 0.5 V - 9.5V DC
Current Outputs 4-20 mA
Digital Outputs SSI
Current Consumption 50 mA (max)
Load Resistance (current) 550 Ω
Load Resistance (voltage) 2K Ω
Field Programmability Available
Environmental Specifications
Operating Temperature Range -20 to +85 °C, -40 to +125 °C opt
Storage Temperature Range -40 to +105 °C, -40 to +125 °C opt
Humidity 95% RH non-condensing
Protection Class (IP rating) IP67
EMC emit/susc Susceptibility: EN 61000-6-2
Radiated: EN 61000-6-3
Shock  300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min)
Vibration 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz
Mechanical Specifications
Operating Pressure 4000 psig max
Material (Housing) Stainless Steel
Mounting Type embed or -8 O-ring port (3/4-16)
Connector M8 3 pin

L4 Linear Position Sensor

Short Range, Flange Mounted Linear Cylinder Position Sensor

The Everight Sensors L4 Linear Position Sensor is a robust, flange mounted linear position sensor that reliably provides an analog current or voltage (SSI available as OEM option) output over the sensor’s measuring range while operating in an industrial environment. Based on Everight’s proprietary contactless NyceWave Position Sensing technology, the L4 is not subject to wear-out of the sensing element and experiences no output signal deterioration over the life of the sensor. The L4’s spring loaded shaft allows for precision measurement of the linear position of a moving object without the necessity of mechanical attachment. This sensor is also available with a non-spring loaded shaft which may be supplied detached from the sensor and created in a variety of configurations for OEM's.

 
L4 Linear Position Sensor
  • Robust construction
  • Adapts to multiple popular application types
  • High resolution with multiple analog output options
  • Spring loaded or free floating target shaft options
  • Field programmability available
  • NyceWave contactless sensing for virtually infinite sensor element life
L4 Specifications
 
 
Operating Specifications
Measurement Range (linear) 0.5 inches - 3 inches (13 mm - 75 mm)
Non-linearity ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional
Noise 3 mV rms max (Voltage) ≤ 6 µA rms (Current)
Frequency Response (-3 dB) 300 Hz (nominal)
Electrical Specifications
Supply Voltage Input 9 V - 28 V DC ± 2%
Voltage Outputs 0.5 V - 4.5 V, 0.5 V - 9.5V DC
Current Outputs 4-20 mA
Digital Outputs SSI
Current Consumption 50 mA (max)
Load Resistance (current) 550 Ω
Load Resistance (voltage) 2K Ω
Field Programmability Available
Environmental Specifications
Operating Temperature Range -20 to +85 °C, -40 to +125 °C opt
Storage Temperature Range -40 to +105 °C, -40 to +125 °C opt
Humidity 95% RH non-condensing
Protection Class (IP rating) IP65
EMC emit/susc Susceptibility: EN 61000-6-2
Radiated: EN 61000-6-3
Shock  300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min)
Vibration 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz
Mechanical Specifications
Material (Housing) Aluminum
Material (Flange) Aluminum
Material (Shaft) Stainless Steel
Mounting Type Flange
Connector M8 3 pin

L14 Linear Position Sensor

Heavy Duty, Free Standing Linear Position Sensor

The Everight Sensors L14 is an extremely robust free standing linear position sensor designed to provide an analog proportional voltage output over measuring ranges from 50 to 400mm while operating in difficult environments. Based on Everight’s proprietary, contactless NyceWave™ (DIST) Distributed Impedance Sensing Technology, the L14 employs a unique solid probe construction that is extremely tough when subjected to intense shock and vibration, and yet only needs to interact with a plain conductive target tube to operate, rather than a magnet or other special target type. Contactless sensors such as the L14 are not subject to wear and therefore experience no signal output deterioration over the life of the sensor.

L14 Linear Position Sensor
 
  • Robust construction
  • Minimal stroke to length ratio
  • High resolution with multiple analog output options
  • Mounts with rod end bearings or clamps
  • Field programmability available
  • NyceWave contactless sensing for virtually infinite sensor element life
L14 Specifications
 
Operating Specifications
Measurement Range (linear) 4 inches - 30 inches (100 mm - 750 mm)
Non-linearity ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional
Noise 3 mV rms max (Voltage) ≤ 6 µA rms (Current)
Frequency Response (-3 dB) 300 Hz (nominal)
Electrical Specifications
Supply Voltage Input 9 V - 28 V DC ± 2%
Voltage Outputs 0.5 V - 4.5 V, 0.5 V - 9.5V DC
Current Outputs 4-20 mA
Digital Outputs SSI
Current Consumption 50 mA (max)
Load Resistance (current) 550 Ω
Load Resistance (voltage) 2K Ω
Field Programmability Available
Environmental Specifications
Operating Temperature Range -20 to +85 °C, -40 to +125 °C opt
Storage Temperature Range -40 to +105 °C, -40 to +125 °C opt
Humidity 95% RH non-condensing
Protection Class (IP rating) IP67
EMC emit/susc Susceptibility: EN 61000-6-2
Radiated: EN 61000-6-3
Shock  300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min)
Vibration 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz
Mechanical Specifications
Material (Housing) Aluminum
Material (Shaft) Stainless Steel
Mounting Type Rod eye end
Connector M8 3 pin

L50 Linear Position Sensor

Clevis Base Mounted
Linear Cylinder
Position Sensor

The Everight Sensors L50 is an extremely robust linear position sensor designed to be mounted between the clevis tines to the base plate of a hydraulic cylinder, and reliably provide a proportional analog output over the sensor’s measuring range (2 to 40 inches) while operating in a heavy duty fluid power environment. Based on Everight’s proprietary, contactless NyceWave™ (DIST) Distributed Impedance Sensing Technology, the L50 employs a unique solid probe construction that is extremely robust when subjected to intense shock and vibration, and only requires a simple conductive tube target (or simply the gun drill ID of the cylinder rod) for operation, rather than a magnet or some other special target type. Contactless sensors such as the L50 are not subject to wear and therefore experience no output signal deterioration over the life of the sensor.

L50 Linear Position Sensor
  • Extremely robust construction
  • Easily adapts to clevis type cylinder end-mounts
  • High resolution with multiple analog output options
  • Senses cylinder rod…no need for magnet or target tube
  • Field programmability available
  • NyceWave contactless sensing for virtually infinite sensor element life
L50 Specifications
 
Operating Specifications
Measurement Range (linear) 4 inches - 30 inches (100 mm - 750 mm)
Non-linearity ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional
Noise 3 mV rms max (Voltage) ≤ 6 µA rms (Current)
Frequency Response (-3 dB) 300 Hz (nominal)
Electrical Specifications
Supply Voltage Input 9 V - 28 V DC ± 2%
Voltage Outputs 0.5 V - 4.5 V, 0.5 V - 9.5V DC
Current Outputs 4-20 mA
Digital Outputs SSI
Current Consumption 50 mA (max)
Load Resistance (current) 550 Ω
Load Resistance (voltage) 2K Ω
Field Programmability Available
Environmental Specifications
Operating Temperature Range -20 to +85 °C, -40 to +125 °C opt
Storage Temperature Range -40 to +105 °C, -40 to +125 °C opt
Humidity 95% RH non-condensing
Protection Class (IP rating) IP67
EMC emit/susc Susceptibility: EN 61000-6-2
Radiated: EN 61000-6-3
Shock  300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min)
Vibration 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz
Mechanical Specifications
Operating Pressure 4000 psig max
Material (Housing) Stainless Steel
Mounting Type Body mount, side O-ring
Connector M8 3 pin

 

 

Everight Linear Position Sensors

 

Everight Linear Position Sensors Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Everight Linear Position Sensors hakk?nda daha fazla bilgi i?in t?klay?n?z.